580438
35
Zoom out
Zoom in
Previous page
1/187
Next page
36
MAX973HD
English
Notes on the Route Guidance
When you enter the destination, be sure to stop
the vehicle in a safe place.
The displayed route is only a suggested route.
Roads can change every day, and may have
changed in geometries and traffic regulations
from the date the map data is created. Be sure
to follow the actual traffic regulations.
It may take a little time until the suggested route
is displayed according to the situation.
Even when the destination is entered by the
Stored Routes, the current location map screen
is displayed. When the starting point is set to a
remote position from the vehicle position, the
route may not be displayed on the screen.
Roads and places where the vehicle cannot
pass, such as roads in housing areas, site or in
installations, and roads under construction may
be included in the suggested route.
The passed waypoints are not included for
route recalculation.
When you set waypoints, the system calculates
the routes between every point. Therefore, the
following notes apply:
If a route between certain waypoints is not
found, no route may be displayed.
The route may not be connected in the
vicinity of a waypoint.
A U-turn may be required at a waypoint.
The route calculation may not be completed in
the following cases:
If there is no main road within a range of
approx. 5 km (3 miles) from the current
location.
If there is no main road within a range of
approx. 5 km (3 miles) from the destination
(or waypoints).
If the vehicle is too close to the destination.
In this case, a message to inform you about
this will be displayed.
If it is impossible to reach the destination or
waypoints because of traffic regulations,
etc.
If the map database does not contain the
area data of the selected locations.
If only an extremely roundabout route is
available to reach the destination or
waypoints.
When displaying a route, the followings may
occur:
Even if a route calculation is requested on a
main road, the start point of the suggested
route may not exactly match the current
vehicle location.
If a route calculation is requested on a main
road, the end point of the suggested route
may not exactly match the destination.
If a route calculation is requested on a main
road, the system may suggest a route
starting from another main road.
In this case, park the vehicle in a safe
location and adjust the current location
using Setting menu, or continue driving until
the vehicle icon appears on a main road. If
either of these methods are not successful,
request a route calculation again.
Ferry lines are stored in this system. Take
into consideration the travel time required
and operational condition before deciding
whether to use them or not.
The current location or the travelling direction
may shift according to the travelling condition.
It is not a malfunction, and will return to a
normal display when keeping travelling for a
while.
Though the vehicle position may shift in places
other than the road such as in the parking lot,
etc., it is not a malfunction. It will return to a
normal display when travelling on an actual
road for a while.
In the current location display, a representative
name of the place which is nearest to the
vehicle position in the map database is
displayed, it may be different from the actual
place name.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion MAX973HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion MAX973HD in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info