580549
58
Zoom out
Zoom in
Previous page
1/77
Next page
62
MAX678RVD
English
Owner’s manual
NAVI Operations (NAX973HD/NAX963HD, etc.)
NAVI functions
Note:
Hereafter in this section, the Navigation system will
be called as “NAVI”.
When the Clarion NAVI NAX963HD is connected,
the following functions are available:
Showing the NAVI display
Operation by using the panel side buttons
NAVI guidance voice interruption
When the NAVI (NAX963HD) is being used…
If the 5.1ch surround decoder (DVH943) is
connected, the voice interruptions of the
NAVI will not work.
If the 5.1ch surround decoder (DVH943N) is
connected, the voice interruptions of the
NAVI will work.
When a voice interrupt of the NAVI arises during 2-
ZONE ON, the sound of the MAIN zone is muted,
and the sound of the SUB zone is output normally.
When it arises during 2-ZONE OFF, the audio
signals to the 4ch speakers are attenuated, and
the voice from the navigation system is output from
the front two speakers.
Since the Clarion NAVI (NAX963HD) is
automatically recognised, you can omit the below-
mentioned CONNECT setting.
Setting NAVI as external input
equipment
Perform this setting after connecting NAVI.
The factory default setting is “NONE”.
1. Press the [ADJ] button, and touch the
[GENERAL] key.
2. Touch the []] key of the CONNECT item, and
touch the [RGB], [COMPOSITE], [OTHERS]
or [NONE] to set the function.
RGB:
Select when the Clarion NAVI (NAX943DV,
NAX9500E) is connected.
Control of it can be made only from the remote
control unit, and the NAVI voices are output
from the special speakers for the NAVI.
* Do NOT connect the NAX943DV or
NAX9500E to the CCD terminal of the main
unit; they can only be connected to the RGB
input terminal of the main unit via RGB cable.
COMPOSITE:
Select when a NAVI of the other manufacturer
is connected.
Control of it can be made only from the remote
control unit, and the NAVI voices are output
from the special speakers for the NAVI.
OTHERS:
Select for external devices other than a NAVI.
NONE:
Select when no external device is connected.
NAVI operation
Changes between the NAVI display and the
Audio/Visual (hereinafter, refered as “AV”)
display.
Note:
The below-mentioned [NAVI] and [AV] keys are
available only when the Clarion NAVI
(NAX963HD) is connected.
When the other NAVI is connected, use the [MAP]
button to switch the screen mode.
AV screen
When the image interruption from the NAVI
arises, the screen will be changed from the AV
screen to the NAVI screen. When the interruption
is finished, the screen will return to the previous
AV screen.
NAVI screen
Audio operations made in the NAVI mode will be
indicated for about 2 seconds at the bottom of the
NAVI screen.
Operations using the buttons
[VOICE] button
The VOICE screen of the NAVI mode is
displayed.
When in the AV mode, it is changed to the
NAVI mode, and the VOICE operation is
performed.
[MAP] button
The MAP screen of the NAVI mode is
displayed.
When in the AV mode, it is changed to the
NAVI mode.
[MAP] key
[AV] key
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion MAX678RVD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion MAX678RVD in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info