580545
29
Zoom out
Zoom in
Previous page
1/36
Next page
29
English
FZ409E
1. Slide along
[
]
slider or touch
[
]
/
[
]
key
to choose 1~6 to input the security code.
After input first digit, “
0000” will stop blinking.
2. Touch
[
]
key to go on with the next digit.
Common Operations
Security code
This unit can deter theft by checking registered
security code if security code is registered. The
security code is registered in the Adjustment
mode “CODE” item.
For first time installation, no security code is re
-
quired.
If security code is registered, changing or discon
-
necting the vehicle battery will cause the security
code input to be requested for activation. INPUT
0000” will be displayed and “0000” is blinking.
CAUTION
!
If entered code is wrong, "----" will be displayed
for a given period during which no operation
can be performed. After the locking peroid,
"INPUT 0000" will be displayed again. For
mistakes less than 7 times, the locking time
will be 15 seconds; from 7
th
time onwards, the
locking time will be 15 minutes.
Adjustment Mode
1. Touch the
[
]
key to switch to ADJ menu.
2. Select SETTINGin the menu to enter setting
mode.
3. Each time you slide along the
[
]
or touch
[
]
/
[
]
key, the setting mode changed as
following order:
DISP BRIGHT
” “BEEP” “CODE
SCREEN SAVER” “AUTO SCROLL
SCROLL SPEED” “DIMMER
BLINKING LED” “AMP CANCEL
TEL SWITCH” “SYSTEM CHECK
If no operation is performed for more than 10
seconds, ADJ mode is cancelled and the display
returns to the previous mode.
Setting the beep
The factory default setting is “ON”.
3 - 1 .
Select “BEEP”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Touch the
[
]
/
[
]
key to select ON or
OFF”.
3. Touch
[
]
key to confirm during finish input
the 4 security code.
4. Successful password input will power ON the
unit.
Setting the display brightness
You can adjust the display brightness to match
the angle of installation of the unit.
The factory default setting is “5”.
(
Adjustment level: 1 to 8
)
3 - 1 .
Select “DISP BRIGHT”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Slide along
[
]
slider or touch
[
]
/
[
]
key to adjust the value.
Notes:
If both the dimmer and the car’s illumination are
turned on, “ILLUMI ON” and the adjustment value
will be displayed. If the dimmer is turned on and
the car’s illumination is turned off, ILLUMI OFF
and the adjustment value will be displayed.
If the dimmer is turned off, only the adjustment value
will be displayed.
The display brightness level setting during dimmer
and car’s illumination are turned on has indepen
-
dent adjustment value.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion FZ409E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion FZ409E in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion FZ409E

Clarion FZ409E User Manual - German - 36 pages

Clarion FZ409E User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info