580545
18
Zoom out
Zoom in
Previous page
1/36
Next page
18
English
FZ409E
Radio Data System Operations
Radio Data System
This unit has a built-in Radio Data System de-
coder system that supports broadcast stations
transmitting Radio Data System data.
This system can display the name of the broad
-
cast station being received
(
PS
)
and can auto
-
matically switch to the broadcast station with the
best reception as you move long distances
(
AF
switching
)
.
Also, if a traffic announcement or programme
type is broadcast from an Radio Data System
station, no matter what mode you are in, this
broadcast is received. Additionally, if EON in
-
formation is received, this information enables
automatic switching of other preset stations on
the same network and interruption of the station
being received with traffic information from other
stations
(
TP
)
. This function is not available in
some areas. When using the Radio Data System
function, always set the radio to FM mode.
AF : Alternative Frequency
PS : Programme Service Name
PTY : Programme Type
EON : Enhanced Other Network
TP : Traffic Programme
Radio Data System interrupt does not function
during AM radio reception.
When set receives Radio Data System signal, and
can read PS data, PS appears in the display.
TA
(
Traffic Announcement
)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the Function mode so you can listen to it. Traffic
programme
(
TP
)
automatic tuning is also pos
-
sible.
This function can only be used when
is lit in the
display. When is lit, this means that the Radio
Data System broadcast station being received has
traffic announcement programmes.
Setting the TA standby mode
If you touch the
[
]
key when only
is lit in
the display, and light in the display and
the unit is set into the TA standby mode until a
traffic announcement is broadcast. When a traf-
fic announcement broadcast starts, TRA INFO
appears in the display. If you touch the
[
]
key
while a traffic announcement broadcast is being
received, the traffic announcement broadcast re
-
ception is cancelled and the unit goes into the TA
standby mode.
Searching for a TP station
When is not lit, if you touch the
[
]
key,
in the display lights and the unit automatically re-
ceives a TP station.
Note:
If a TP station is not received, the unit continues the
search operation. Touch
[
]
key again goes off
in the display and stops TP station searching.
Cancelling an emergency broadcast
If you touch the
[ ]
key, emergency broadcast
reception is cancelled.
Cancelling the TA standby mode
As and lit in the display, touch the
[
]
key. The in the display goes off and the TA
standby mode is cancelled.
If
is not lit, touch the
[
]
key searches for a
TP station.
Volume setting of TA, emergency
broadcast
(
ALARM
)
and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
The factory default setting for this volume is “VOL
15”.
During a TA, ALARM or PTY interrupt, slide the
[
]
slider to set the volume to the desired level
(
0 to 33
)
.
When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter
-
rupt.
Emergency broadcast
If an emergency broadcast is received, all the
Function mode operations are stopped. ALARM
appears in the display and the emergency broad-
cast can be heard.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion FZ409E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion FZ409E in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion FZ409E

Clarion FZ409E User Manual - German - 36 pages

Clarion FZ409E User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info