580455
62
Zoom out
Zoom in
Previous page
1/71
Next page
62
Button Description
Auto Time Correction to GPS Use this feature to synchronise the clock of your device to the very
accurate time provided by the GPS receiver.
Use Auto Time Zone
Use this feature to synchronise the time zone of the clock of your
device to the time zone based on your current GPS position. This is
useful if you travel abroad.
Set Time Zone Set time zone manually if you do not want to synchronise the time
zone automatically. This allows you to use Auto Time Correction and
apply a time zone offset to obtain the desired time.
Compare GPS and device
times
The current time of the GPS receiver and the device clock are
displayed. Please note that the GPS clock is only available with GPS
reception. This allows you to check whether any correction is needed.
4.5.5 Navigation settings
You can control how Clarion EZ Drive behaves during navigation. Tap the following buttons: ,
, .
Button Description
Keep Position on Road
This feature allows car drivers to always correct GPS position errors
by matching the vehicle position to the road network. For pedestrian
navigation, this feature is automatically disabled to let the software
show your exact position.
By turning off this feature you also turn off the GPS position error
filtering. The position shown on the map will be subject to all position
errors and position fluctuations.
Off-route Recalculation
This switch tells Clarion EZ Drive whether to automatically recalculate
the route when you deviate from it. If this feature is turned off, you
need to initiate route recalculation otherwise navigation will be stopped
until you return to the originally recommended route.
Setting another point than the current GPS position as the start point
of the active route will automatically disable this feature.
Restore Lock-to-Position
If you have accidentally moved the map during navigation, this feature
can move the map back to your current GPS position after the given
period of inactivity.
Automatic Overview
This feature will switch the map view to Overview mode when the next
route event is at a distance. Overview is a zoomed out 2D view to let
you see the surrounding area. You have the following controls for
Automatic Overview:
Turn Distance for Overview: The map view will be switched to
Overview mode if the next route even is at least as far as this
value.
Default Zoom Level: Overview mode will appear with this zoom
level. You can scale the map in Overview mode but next time
Overview appears again, this zoom level will be applied.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion EZD580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion EZD580 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info