580542
17
Zoom out
Zoom in
Previous page
1/51
Next page
Basic Operations
English
17
DXZ778RUSB
Adjusting Sound Setting
Mode
Setting the preset setting
This function allows you to recall, save or
initialize the sound settings.
If your speaker system is “
3WAY
” or “
2WAY
”,
you can store and recall up to three adjustments
you have made to “
P.EQ ON/OFF
”, “
X-OVER
”,
T ALIGNMENT
”, “
SPEAKER GAIN
”.
LOAD
: To recall the stored sound settings.
SAVE
: To save the sound settings.
INITIAL
: To initialize the sound settings.
The load and the save can be adjusted as
follows.
2-1. Select “
PRESET
”.
3-1. Press the [ ] button.
3-2. Push the [
SEEK PANEL
] leftward or
rightward and select from:
LOAD
SAVE
INITIAL
LOAD
”...
3-3. Push the [
P.CH
] button upward or
downward to adjust the load and the save.
LOAD
:“
SELECTING 1
” to “
SELECTING
3
” (The factory default setting is
SELECTING 1
”)
SAVE
:“
1
” to “
3
” (The factory default
setting is “
1
”)
3-4. Press and hold the [ ] button to
store into memory.
(
LOAD
: Press and hold the button for 1
second or longer.
SAVE
: Press and hold the button for 2
seconds or longer.)
Setting the all seat
The setting of “
T ALIGNMENT
” and “
SPEAKER
GAIN
” temporarily returns to the factory default
setting. When the setting that is adjusted for the
driver's seat returns to the factory default
setting, a sound suitable for all seats is
provided.
The factory default setting is “
OFF
”.
2-1. Select “
ALL SEAT
”.
3-1. Push the [
P.CH
] button upward or
downward to select “
ON
” or “
OFF
”.
Setting the X-OVER
This function allows you to adjust the speaker
setting such as cutoff frequencies or slope
matched to the speakers you are using.
(Crossover).
2-1. Select “X-OVER”.
3-1. Press the [ ] button.
3-2. Push the [SEEK PANEL] leftward or
rightward and select from:
To change sound setting mode
1. Press and hold the [ ] button for 2
seconds or longer and select the sound
setting mode to adjust.
2. Push the [SEEK PANEL] leftward or
rightward to select the “item name”.
When speaker system is “NORMAL”:
PRESETALL SEATT
ALIGNMENTP.EQ ON/OFFEQ
SELECTSUB WOOFER
PRESET”...
When speaker system is “3WAY”:
PRESETALL SEATX-OVER
T ALIGNMENTSPEAKER GAIN
P.EQ ON/OFFEQ SELECT
SUB WOOFERPRESET”...
When speaker system is “2WAY”:
PRESETALL SEATX-OVER
T ALIGNMENTSPEAKER GAIN
P.EQ ON/OFFEQ SELECT
PRESET”...
In the case of item names appearing with
the “ENT” suffix, after the item name, the
[] button must be pressed to display
the setting value.
After completing settings, press the
[]
button to return to the previous mode.
HIGH
• HPF
• HPF SLOPE
• PHASE
MID
• LPF
• LPF SLOPE
HPF
• HPF SLOPE
• PHASE
SUB-W
• LPF
LPF SLOPE
HPF
• HPF SLOPE
PHASE
HIGH
3WAY mode
(High pass filter)
(HPF slope)
(Phase)
(Front speaker (high))
(Front speaker (mid))
(Subwoofer)
(Low pass filter)
(LPF slope)
DXZ778RUSB_EN.book 17 ページ 2006年12月26日 火曜日 午後2時25分
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DXZ778RUSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DXZ778RUSB in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info