580542
14
Zoom out
Zoom in
Previous page
1/51
Next page
Basic Operations
English
14
DXZ778RUSB
Compensation
There is no need to compensate frequency
characteristics if they are flat (no peaks or
valleys) when you have measured the
frequency characteristics with a measuring
device. However, sometimes the frequency
characteristics rise or fall in some places. If this
happens, the frequency characteristics must be
compensated. Create a frequency curve having
characteristics that are opposite to the center
frequency of parts where the characteristics rise
and fall to cancel out these peaks and values,
and make the frequency characteristics as flat
as possible.
Making the frequency characteristics as flat as
possible is called “Compensation”.
On this unit, frequency characteristics can be
compensated by P.EQ (Parametric Equalizer).
Compensation of frequency
characteristics
The figure below shows the relationship
between the center frequency, gain and Q
curve.
Q curve
The Q curve becomes sharper when the
numerical value is increased, and smoother
when the numerical value is decreased.
Flat frequency characteristics can be made by
selecting a Q curve opposite to that of the curve
to be compensated.
Setting P.EQ
P.EQ (Parametric Equalizer) allows you to
compensate the entire frequency level range in
detail by smooth curve using frequency
compensation matched to the type of your car.
The item corresponding to the system set in the
section “
Selecting speaker system
” (page 11)
will be displayed.
2-1. Select “
P.EQ
”.
3-1. Press the [ ] button.
When speaker system is “NORMAL”:
3-2. Push the [
SEEK PANEL
] leftward or
rightward and select from:
SEDAN-1
SEDAN-2
MINI VAN-1
MINI VAN-2
WAGON
USER
”...
P.EQ basic menu
3-3. Press the [
OPTION
] button.
3-4. Press the [
MENU
] button and select from:
BAND1
BAND2
BAND3
BAND1
”...
3-5. Push the [
SEEK PANEL
] leftward or
rightward and select from:
3dB
Q =
F
f
f
Center
Frequency (F)
Frequency
(Hz)
Q curve(Q)
Frequency
curve
Level
(dB)
Gain
Q curve : 20
Q curve : 1
No. Display name
Speaker Mounting
position
1 SEDAN-1
(sedan-1)
Front: Front door
Rear: Rear parcel
2 SEDAN-2
(sedan-2)
Front: Front door
Rear: Rear door
3 MINI VAN-1
(mini van-1)
Front: Front door
Rear: Luggage (side)
4 MINI VAN-2
(mini van-2)
Front: Front door
Rear: Rear door
5 WAGON
(wagon)
Front: Front door
Rear: Luggage (side)
6 USER (user) User preference
FRONT
• FREQUENCY
• GAIN
• Q
REAR
• FREQUENCY
• GAIN
Q
FRONT
(Front speaker)
(Frequency) (20 Hz to 20 kHz)
(Gain) (–12 dB to +12 dB)
(Q curve) (1, 3, 5, 7, 20)
(Rear speaker)
(20 Hz to 20 kHz)
(–12 dB to +12 dB)
(1, 3, 5, 7, 20)
DXZ778RUSB_EN.book 14 ページ 2006年12月26日 火曜日 午後2時25分
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DXZ778RUSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DXZ778RUSB in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info