580541
13
Zoom out
Zoom in
Previous page
1/42
Next page
Basic Operations
English
13
DXZ578RUSB
Q curve
The Q curve becomes sharper when the
numerical value is increased, and smoother
when the numerical value is decreased.
Flat frequency characteristics can be made by
selecting a Q curve opposite to that of the curve
to be compensated.
Adjusting the bass
The bass gain, bass FREQ (center frequency)
and bass Q can be adjusted as follows.
The adjustment can only be performed when
the DZE is set to “
DZE OFF
”.
2-1. Select “
BASS
”.
2-2. Press the [ ] button.
2-3. Push the [
SEEK PANEL
] leftward or
rightward and select from:
B GAIN
B FREQ
B Q
3-1. Press the [
UP
] or [
DN
] button to adjust the
gain, the FREQ (center frequency) and the
Q.
B GAIN
: –7 to +7 (The factory default
setting is “
0
”)
B FREQ
: 50Hz/80Hz/120Hz (The factory
default setting is “
50
”)
B Q
: 1/1.25/1.5/2 (The factory default
setting is “
1
”)
3-2. Press the [ ] button to return to the
previous mode.
Adjusting the treble
The treble gain and treble FREQ (center
frequency) can be adjusted as follows.
The adjustment can only be performed when
the DZE is set to “
DZE OFF
”.
2-1. Select “
TREBLE
”.
2-2. Press the [ ] button.
2-3. Push the [
SEEK PANEL
] leftward or
rightward and select from:
T GAIN
T FREQ
3-1. Press the [
UP
] or [
DN
] button to adjust the
gain and FREQ (center frequency).
T GAIN
: –6 to +6 (The factory default
setting is “
0
”)
T FREQ
: 8KHz/12KHz (The factory default
setting is “
12K
”)
3-2. Press the [ ] button to return to the
previous mode.
Adjusting the sound restorer
The sound restorer enriches the playback of all
types of music files that have undergone any
level of data compression.
The factory default setting is “
OFF
”.
2-1. Select “
S RESTOR
”.
3-1. Press the [
UP
] or [
DN
] button to adjust.
Each time you press the [
UP
] or [
DN
]
button, the sound restorer changes in the
following order:
OFF
123
Set this adjustment in accordance with the
music source used.
OFF: For music sources compressed at
high bit rate
1: For music sources compressed for high
quality at low bit rate
2: For music sources compressed for
standard quality at low bit rate
3: For music sources compressed for low
quality at low bit rate
Setting high pass filter
2-1. Select “HPF”.
3-1. Press the [UP] or [DN] button to select the
setting. Each time you press the [UP] or
[DN] button, the setting changes in the
following order:
THROUGH50Hz80Hz
120Hz
The factory default setting is “THROUGH
(through).
Setting low pass filter
2-1. Select “S-W LPF”.
3-1. Press the [UP] or [DN] button to select the
setting.
Each time you press the [UP] or [DN]
button, the setting changes in the following
order:
THROUGH50Hz80Hz
120Hz
The factory default setting is “THROUGH
(through).
Q curve : 20
Q curve : 1
DXZ578RUSB_EN.book 13 ページ 2006年12月26日 火曜日 午後2時49分
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DXZ578RUSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DXZ578RUSB in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info