580425
19
Zoom out
Zoom in
Previous page
1/25
Next page
280-8143-00
DXZ555MP 21
English
Operations Common to Each Mode
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
The factory default setting is 5.
2-1. Select CONTRAST.
3-1. Turn the [ROTARY] knob to select from 1-8.
To change other settings
1. Press the [ADJ] button to switch to the
adjustment selection display.
2. Press the [a, d] lever upward or
downward to select the item name.
Each time the [a, d] lever is pressed up/
down, the item display changes in the
following order:
BLINK LED AMP CANCEL AUX
SENSE SYS CHK
3. Turn the [ROTARY] knob to select the
desired setting item.
After completing settings, press the [ADJ]
button to return to the previous mode.
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
The factory default setting is OFF.
2-1. Select BLINK LED.
3-1. Turn the [ROTARY] knob to select ON or
OFF.
Setting the external amplifier
The factory default setting is OFF.
2-1. Select AMP CANCEL.
3-1. Turn the [ROTARY] knob to select ON or
OFF.
ON:
Use with connected AMP.
OFF:
Use with inside AMP.
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
The factory default setting is AUX MID.
2-1. Select AUX SENSE.
3-1. Turn the [ROTARY] knob to select AUX
LOW, AUX MID or AUX HIGH.
Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select SYS CHK <E>.
3-1. Press and hold the [ ] button for 1
second or longer.
SYSTEM CHK appears in the display,
then the unit returns to the previous
operation mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be
entered for each mode are as follows.
1. Press the [SRC] button to select the mode
you want to enter a title (TUNER, CD, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a TV station or TUNER for which
you want to enter the title.
3. Press the [D] button and display the title
display.
4. Press and hold the [T] button for 1 second or
longer.
The display switches to the title input display.
5. Press the [a, d] lever upward or downward
to move the cursor.
6. Press the [BND] button to select a character.
Each time you press the [BND] button, the
character changes in the following order:
Capital letters Numbers Symbols
Capital letters
7. Turn the [ROTARY] knob to select the
desired character.
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
9. Press and hold the [ ] button for 2
seconds or longer to store the title into
memory and cancel title input mode.
CD changer mode Number of titles
DCZ625 connected 100 titles
CDC655Tz connected 100 titles
Mode Number of titles
CD mode 50 titles
TV mode 20 titles
Tuner mode 30 titles
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DXZ555MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DXZ555MP in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info