580538
12
Zoom out
Zoom in
Previous page
1/39
Next page
Basic Operations
English
12
DXZ378RMP/DXZ379RMP
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
Setting the Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory.
Select the one you prefer.
The factory default setting is “
OFF
”.
2-1. Select “
Z-EHCR
”.
3-1. Each time you press the [
w
] or [
z
]
button, the tone effect changes in the
following order:
EXCITE
IMPACT
B-BOOST
OFF
EXCITE
: bass and treble emphasized
mid deemphasized
IMPACT
: bass and treble emphasized
B-BOOST
: bass emphasized
OFF
: no sound effect
When “EXCITE” is set:
3-2. Press the [ ] button.
3-3. Press the [
w
] or [
z
] button to adjust the
bass and treble in the range of +3 to –3.
The factory default setting is “
0
”.
3-4. Press the [ ] button to return to previous
mode.
When “IMPACT” is set:
3-2. Press the [ ] button.
3-3. Press the [
w
] or [
z
] button to adjust the
bass and treble in the range of +3 to –3.
The factory default setting is “
0
”.
3-4. Press the [ ] button to return to previous
mode.
When “B-BOOST” is set:
3-2. Press the [ ] button.
3-3. Press the [
w
] or [
z
] button to adjust the
bass in the range of +3 to –3.
The factory default setting is “
0
”.
3-4. Press the [ ] button to return to previous
mode.
Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer is set to “
OFF
”.
2-1. Select “
BASS
”.
3-1. Press the [
w
] or [
z
] button to adjust the
bass.
The factory default setting is “0”.
(Adjustment range: +8 to –8)
Adjusting the treble
This adjustment can be performed only when
the Z-Enhancer is set to “OFF”.
2-1. Select “TREBLE”.
3-1. Press the [w] or [z] button to adjust the
treble.
The factory default setting is “0”.
(Adjustment range: +7 to –7)
Adjusting the balance
2-1. Select “BALANCE”.
3-1. Press the [w] or [z] button to adjust the
balance of the right and left speakers.
The factory default setting is “CENTER
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
Adjusting the fader
2-1. Select “FADER”.
3-1. Press the [w] or [z] button to adjust the
balance of the rear and front speakers.
The factory default setting is “CENTER
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
Note:
During SOUND adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.
To change sound setting
1. Press the [ ] button to switch to the
sound adjustment selection display.
The factory default sound setting is “Z-
EHCR”.
2. Then press the [x] or [v] button to
select the sound adjustment mode.
Each time you press the [x] or [v]
button, the sound adjustment mode
changes as following order:
Z-EHCRBASSTREBLE
BALANCEFADER
In the case of display blinking “ENT”, you
can press the
[] button to adjust the
setting value.
3. Press the [w] or [z] button to adjust the
selected audio mode.
4. After completing settings, press the [ ]
button to return to the previous mode.
DXZ378RMP_EN.book 12 ページ 2006年11月27日 月曜日 午後2時22分
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DXZ378RMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DXZ378RMP in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info