35326
15
Zoom out
Zoom in
Previous page
1/24
Next page
280-8302-00
DB268RMP/BD269RMP/BD269RGMP 15
English
RDS Operations
RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS
data.
This system can display the name of the
broadcast station being received (PS) and can
automatically switch to the broadcast station
with the best reception as you move long
distances (AF switching).
Also, if a traffic announcement or programme
type is broadcast from an RDS station, no
matter what mode you are in, this broadcast is
received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and
interruption of the station being received with
traffic information from other stations (TP). This
function is not available in some areas.
When using the RDS function, always set the
radio to FM mode.
AF : Alternative Frequency
PS : Programme Service Name
PTY : Programme Type
EON : Enhanced Other Network
TP : Traffic Programme
RDS interrupt does not function during AM radio
reception.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
2. Press any one of the [DIRECT] buttons to
call out the regional station.
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
This function can only be used when TP is lit in
the display. When TP is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
Setting the TA standby mode
If you press the [TA] button when only TP is lit
in the display, TP and TA light in the display
and the unit is set into the TA standby mode
until a traffic announcement is broadcast. When
a traffic announcement broadcast starts, TRA
INFO appears in the display.
If you press the [TA] button while a traffic
announcement broadcast is being received, the
traffic announcement broadcast reception is
cancelled and the unit goes into the TA standby
mode.
Cancelling the TA standby mode
With TP and TA lit in the display, press the
[TA] button. The TA in the display goes off and
the TA standby mode is cancelled.
If TP is not lit, pressing the [TA] button searches
for a TP station.
Searching for a TP station
When TP is not lit, if you press the [TA] button,
TA in the display lights and the unit
automatically receives a TP station.
Note:
If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off TA in the display and stops TP station
searching.
RDS mode adjustment
Press and hold the [TA] button for 1 second or
longer to select the RDS mode.
The mode switches as follows each time the
[å] or [] button is pressed:
PTY ON PTY-S<E>
1
AF ON REG
ON
2
....
Press [TA] button to exit RDS mode.
Notes:
1
PTY-S<E> only available when PTY ON.
2
REG ON only available when AF ON.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DB268RMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DB268RMP in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info