35324

Clarion DB179RGMP Manual

15
Zoom out
Zoom in
Previous page
1/28
Next page
14
English
DB178RMP / DB179RMP / DB179RGMP
RDS Operations
Setting the TA standby mode
If you press the
[
TA
]
button when only “
TP” is lit in
the display, “TP” and “TA” light in the display and
the unit is set into the TA standby mode until a
traffic announcement is broadcast. When a traffic
announcement broadcast starts, “TRA INFO” ap-
pears in the display. If you press the
[
TA
]
button
while a traffic announcement broadcast is being
received, the traffic announcement broadcast re
-
ception is cancelled and the unit goes into the TA
standby mode.
Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the
[
TA
]
button. The “TA” in the display goes off and the
TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the
[
TA
]
button searches
for a TP station.
Searching for a TP station
When “TP” is not lit, if you press the
[
TA
]
button,
“TA” in the display lights and the unit automati-
cally receives a TP station.
Note:
If a TP station is not received, the unit continues
the search operation. Pressing
[
TA
]
button again
goes off “TA” in the display and stops TP station
searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP can be
received less than 6, broadcast stations already
stored in memory and left without being overwrit-
ten.
As “TA” lit in the display, press and hold the
[ ]
button for 2 seconds or longer. The TP stations
with the good reception sensitivity are stored into
preset memory.
∗ Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
Emergency broadcast
If an emergency broadcast is received, all the
Function mode operations are stopped.
“ALARM” appears in the display and the emer-
gency broadcast can be heard.
Cancelling an emergency broadcast
If you press the
[
SRC
]
button, emergency broad
-
cast reception is cancelled.
Volume setting of TA, emergency
broadcast
(
ALARM
)
and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting for this volume is “VOL
15”.
During a TA, ALARM or PTY interrupt, turn the
[
ROTARY
]
knob to set the volume to the desired
level
(
0 to 33
)
.
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter
-
rupt.
RDS Mode adjustment
RDS Mode is one of the Adjustment mode.
Please refer chapter “6. OTHER OPERATIONS”
on page 21 for details.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion DB179RGMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion DB179RGMP in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion DB179RGMP

Clarion DB179RGMP User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info