580521
8
Zoom out
Zoom in
Previous page
1/20
Next page
English
8
CZ702E
Audio Setup
Audio Setup
Selecting speaker
When this product is turned on for the first
time or reseted. Rotate the [VOLUME]
knob to select the [INITIAL] and press
the [VOLUME] knob, then press [
]
or [
] button to select : NORMAL / 2-WAY
/3-WAY, it allows you to select a speaker
system.
Speaker system
Speaker system Speaker conguration
NORMAL Front 2ch Rear 2ch Subwoofer 2ch
2-WAY Mid 2ch High 2ch Rear 2ch
3-WAY Mid 2ch High 2ch Subwoofer 2ch
System Setup
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
*When listening to your calls on your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
A-CANCEL: ON/OFF
Rotate the [VOLUME] knob to choose
Amplier-Cancel function ON or OFF.
If you don’t use internal amplier, set it to ON.
DIMMER: ON/OFF
Rotate the [VOLUME] knob to choose
DIMMER ON or OFF.
ON: LCD dimmer is active when small light
of vehicle is turned ON.
OFF: LCD always maximum brightness
regardless of the vehicle small light.
BEEP: ON/OFF
Rotate the [VOLUME] knob to choose button
beep sound ON or OFF.
SVC LINK
Rotate the [VOLUME] knob to choose Service
Link mode.
DAB-DAB: Switc hes to a differe nt
frequency DAB station on the same network
if current DAB station signal becomes weak.
DAB-FM: Switches to a different frequency
FM station on the same network if current
DAB station signal becomes weak.
DAB&FM: Swit che s to a d iff ere nt
frequency DAB station or FM station on the
same network if current DAB station signal
becomes weak.
OFF: No switch.
Note:
If you wish to use the SERVICE LINK, please
set to ON the AF function.
DAB LBND: ON/OFF
When you want to listen DAB L-BAND(At
the region support DAB L-BAND), stations,
please set to ON.
Rotate the [VOLUME] knob to choose
L-BAND ON or OFF.
Normal speaker system (NORMAL)
Front speaker
(left)
Rear speaker
(left)
Subwoofer
Front speaker
(right)
Rear speaker
(right)
2way speaker system (2WAY)
Mid speaker
(left)
High (Tweeter)
(left)
Rear speaker
(left)
Mid speaker
(right)
High (Tweeter)
(right)
Rear speaker
(right)
3way speaker system (3WAY)
Mid speaker
(left)
High (Tweeter)
(left)
Subwoofer
Mid speaker
(right)
High (Tweeter)
(right)
Setting the X-OVER(Crossover)
This function allows you to adjust the speaker
setting such as cutoff frequencies or slope
matched to the speakers you are using.
(Crossover).
Press and hold the [
] button to enter
amplier setting mode. Use the [
] or [ ]
button to select an option.
Press [ VOLUME ] knob to conrm.
To return to the previous settings, press the
[ VOLUME ] knob again.
1. When speaker system is
“NORMAL”.
TIME ALIGNMENT
FRONT L/R: 0----501.4cm
REAR L/R: 0----501.4cm
SW L/R: 0----501.4cm
HPF/LPF FRONT
- FR HPF
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
HPF/LPF REAR
- REAR HPF
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
HPF/LPF S-WOOFER
- SW LPH
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
2. When speaker system is “2WAY”.
TIME ALIGNMENT
HIGH L/R: 0----501.4cm
MID L/R: 0----501.4cm
REAR L/R: 0----501.4cm
2W XOVER
- HIGH HPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ / 100HZ / 125HZ / 160HZ /
200HZ / 250HZ / 315HZ / 400HZ / 500HZ
/ 630HZ / 800HZ / 1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ 12.5K / 16K / 20K / THROUGH
SLOP: -6 / -12DB
- HIGH SPK: PHASE NOR/PHASE REV
- MID LPF
CUT: 630HZ / 800HZ / 1K / 1.25K / 1.6K
/ 2K / 2.5K / 3.15K / 4K / 5K / 6.3K / 8K /
10.0K / THROUGH
SLOP: -6 / -12DB
- MID HPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ /1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ THROUGH
SLOP: -6 / -12DB
- MID SPK: PHASE NOR/PHASE REV
- REAR LPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ / 100HZ / 125HZ / 160HZ /
200HZ / 250HZ / 315HZ / 400HZ / 500HZ
/ 630HZ / 800HZ / 1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ THROUGH
SLOP: -6 / -12DB
- REAR HPF
CUT: 16HZ / 20HZ / 25HZ / 31.5HZ /
40HZ / 50HZ / 63HZ / 80HZ / 100HZ
/ 125HZ / 160HZ / 200HZ / 250HZ /
THROUGH
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CZ702E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ702E in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CZ702E

Clarion CZ702E User Manual - German - 22 pages

Clarion CZ702E User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info