Manual Clarion CZ509E (page 24 of 36) (English)

580518

Zoom out

Zoom in

1/36

English

24 CZ509E/CZ509ER/CZ509EG

Operations Common to Each Mode

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “10”.

(Adjustment level: 1 to 16)

2-1. Select “CONTRAST”.

3-1. Press the [ ] or [ ] button to adjust the

contrast.

● Displaying the settings

The number of indicator of this unit decreases,

you can see the state of current settings at any

operation mode.

2-1. Select “SETTINGS”.

3-1. Press the [ ] or [ ] button to display the

state of current settings.

∗ When the setting is selected, after 1 second

the current state will be displayed.

● Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [ ] or [ ] button to select the

setting.

Each time you press the [ ] or [ ]

button, the setting changes in the following

order:

“MESSAGE” ↔ “ON” ↔ “OFF”

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

∗ The factory default setting is “WELCOME TO

CLARION”.

2-1. Select “MESSAGE INPUT”.

3-1. Press the [ ] button.

3-2. Press and hold the [BND] button (1 sec.) to

clear the old message.

3-3. Press the [x] or [v] button to move the

cursor.

3-4. Press the [BND] button to select a

character type. Each time you press the

[BND] button, the character type changes

in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters…

3-5. Press the [ ] or [ ] button to select the

desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

3-7. Press and hold the [ ] button (2 sec.) to

store the message in memory.

∗ Press and hold the [BND] button (1 sec.) to

cancel the input message. Then press and

hold the [ ] button (2 sec.) to store the

message and the message return to default

setting.

To change adjustment setting

1. Press and hold the [DISP] button (1 sec.)

to switch to the adjustment selection

display.

2. Press the [x] or [v] button to select

the “item name”.

“CONTRAST” ↔ “SETTINGS” ↔

“SCRN SVR” ↔ “MESSAGE INPUT” ↔

“SCROLL” ↔ “DIMMER” ↔ “BLINKLED”

↔ “A-CANCEL” ↔ “INT-SW” ↔ “SYSTEM

CHECK”

3. Press the [ ] or [ ] button to select the

“desired setting value”.

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

For example: after 1 second:

CZ509E_EN.book Page 24 Wednesday, January 21, 2009 5:27 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ509E in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CZ509E

Clarion CZ509E User Manual - German - 41 pages

Clarion CZ509E User Manual - Dutch - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clarion CZ509E Manual

Product: