169006
12
Zoom out
Zoom in
Previous page
1/29
Next page
English
12
Radio Data System
This unit has a built-in Radio Data System
decoder system that supports broadcast
stations transmitting Radio Data System data.
When using the Radio Data System function,
always set the radio to FM mode.
AF function
The AF function switches to a dierent
frequency on the same network in order to
maintain optimum reception.
* The factory default setting is ON.
1. Press and hold the [D] button.
2. Press the [ ] or [ ] button to select
AF.
3. Rotate the knob to select AF ON or AF
OFF.
AF ON:
AF in the display lights and AF function
turns on.
AF OFF:
AF in the display goes o and AF function
turns o.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for
that region is received.
* The factory default setting is ON.
Notes:
This function is disabled when a national
station such as BBC R2 is being received.
The REG function ON/OFF setting is valid
when the AF function is ON.
1. Press and hold the [D] button.
2. Press the [ ] or [ ] button to select
REG.
3. Rotate the knob to select REG ON or REG
OFF.
Manually tuning a regional
station in the same network
1. This function is valid when the AF function
is ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
TA (Trac Announcement)
In the TA standby mode, when a trac
announcement broadcast starts, the trac
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Trac programme (TP)
automatic tuning is also possible.
* This function can only be used when
“TP” is lit in the display. When TP is lit,
this means that the Radio Data System
broadcast station being received has trac
announcement programmes.
SettingtheTAstandbymode
If you press the [TA] button, “TA” lights in
the display and the unit is set into the TA
standby mode until a trac announcement
is broadcast. When a trac announcement
broadcast starts, TRAF INF appears in the
display. If you press the [TA] button while
a trac announcement broadcast is being
received, the trac announcement broadcast
reception is cancelled and the unit goes into
the TA standby mode.
CancellingtheTAstandbymode
When “TA” is lit in the display, press the [TA]
button. The TA in the display goes o and
the TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press the [MENU] button, then rotate the
knob to select PTY type, and press the
knob to conrm selection, the unit begins
searching.
Radio Data System Operations
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion cz500e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion cz500e in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion cz500e

Clarion cz500e User Manual - German - 30 pages

Clarion cz500e User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info