Manual Clarion CZ302 (page 8 of 20) (English)

580424

Zoom out

Zoom in

1/20

English

302

System Setup

Press the [ ] button to enter sound effect

setting mode. First press shows current EQ.

Rotate the [VOLUME] knob to changes BEAT

EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

Rotate the [VOLUME] knob to changes

CUSTOM, and press the [VOLUME] knob,

the press [

] or [ ] button to select

it including: BAS-G -> BAS-F -> BAS-Q ->

MID-G -> MID-F -> MID-Q -> TRE-G -> TRE-F,

rotate the [VOLUME] knob to select a value.

BAS-G / MID-G / TRE-G: (-7)- (+7)

BAS-F: 50/100/200

BAS-Q: 0.7/1/1.4/2

MID-F: 500/1K/2K

MID-Q: 0.7/1/1.4/2

Audio Setup

TRE-F: 5k/10k/15k

TRE-Q 0.7/1/1.4/2

Press the [

] button, then press [ ] or

[

] button to select USER preset

including:

BALANCE -> FADER -> M-B EX -> LPF(low

pass filter) -> S-W VOL (Subwoofer

Volume), rotate the [VOLUME] knob to

select a value.

BALANCE:LEFT 1-7->CENTER->RIGHT

1-7

FADER:FRONT 1-7->CENTER->REAR 1-7

M-BEX: ON/OFF

LPF: THROUGH/60/90/120

HPF:THROUGH/60/90/120

SUBW VOL: (-6)-(+6)

SCRN SVR: ON/OFF

Rotate the [VOLUME] knob to choose SCRN

SVR (screen saver) ON or OFF.

SCROLL: ON/OFF

For track information that is longer than the

display panel:

When SCOLL is ON, the LCD will scroll the

ID3 TAG information across the display, e.g.:

TRACK->FOLDER->FILE->ALBUM->TITLE-

>ARTIST->TRACK->...

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default

is TRACK, but user can adjust it to other ID3

TAG information by press [DISP] button.

S-CTRL (IPOD mode) : ON/OFF

Rotate the [VOLUME] knob to choose

S-CTRL(Simple control) ON or OFF.

* Refer to P11.

PANDORA: ON/OFF

Select OFF if the Pandora application has not

been installed on your iPod touch or iPhone.

DIMMER: ON/OFF

Rotate the [VOLUME] knob to choose

DIMMER ON or OFF.

• ON: LCD dimmer is active when small light

of vehicle is turned ON.

• OFF: LCD always maximum brightness

regardless of the vehicle small light.

REAR/S-W

Rotate the [VOLUME] knob to choose

REAR or S-WOOFER (SUB-WOOFER).

SW PHASE

Rotate the [VOLUME] knob to choose

SUBWO O F E R phase R E V E R S E or

NORMAL.

TEL-SW

Rotate the [VOLUME] knob to choose

MUTE, ON or OFF.

• MUTE:

The sound from this unit is muted during

telephone calls.

• OFF:

This unit continues normal operation even

when the cellular phone is used.

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

*When listening to your calls on your car

speakers, you can adjust the volume by

turning the [VOLUME] knob.

BEEP: ON/OFF

Rotate the [VOLUME] knob to choose

button beep sound ON or OFF.

12/24H

Rotate the [VOLUME] knob to choose time

format: 12 or 24 hours.

Select tuner as playing source

Press [SRC / ] button once or more to

enter RADIO mode.

Selecting the radio band

Press the [BAND / ] button on the panel

or on the remote control to select one radio

band among FM1, FM2, FM3, AM.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [

] or [ ] button on the panel

to tune in a higher / lower station.

Press the [

] or [ ] button on the

remote control to select preset stations.

Auto tuning

Press and hold the [ ] or [ ] button

to seek a higher / lower station.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a station is received, searching stops

and the station is played.

Preset scan

Preset scan receives the stations stored

in preset memory in order. This function is

useful when searching for a desired station

in memory.

1. Press the [PS/AS] button.

2. When a desired station is tuned in, press

the [PS/AS] button again to continue

receiving that station.

Note:

Be careful not to press and hold the [PS/AS]

button for 1 second or longer, otherwise the

auto store function will begin and the unit

starts storing stations.

Auto store

Only stations with sufcient signal strength

will be detected and stored in the memory.

Press and hold the [PS/AS] button (1 sec.)

to start automatic station search.

Radio Operations

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 4 bands, such as FM1, FM2,

FM3 and AM. FM3 and AM can store

by AS function. Each band can store 6

stations, CZ302 can store 24 stations

in total.

Manual store

When one expected radio station has been

detected, press and hold number button 1-6

to store it in the memory.

Recall the stored stations

Press one numeric button among 1 to 6 on

the panel to select the corresponding stored

station.

Local seeking

When LOCAL seeking is ON, only those

radio stations with strong radio signal could

be received.

To select LOCAL function, press and hold

the [ DISP ] button on the front panel, then

press [

] button repeatedly until LO or

DX displays on the screen, and rotate the

[VOLUME] knob to select Local or Distant

mode.

Note:

The number of radio stations that can be

received will decrease after the local seeking

mode is ON.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ302 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clarion CZ302 Manual

Product: