473627

Clarion CZ102E Manual

7
Zoom out
Zoom in
Previous page
1/14
Next page
6
English
Radio Operations
Manual store
When one expected radio station has been
detected, press and hold number button 1-6 to
store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on the
panel to select the corresponding stored station.
Local seeking
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be
received.
To select LOCAL function, press and hold
the [DISP] button on the front panel, then
press [
] button repeatedly until LO or
DX displays on the screen, and rotate the
[VOLUME] knob to select Local or Distant
mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is ON.
Radio Data System Operations
Radio Data System Operations
Radio Data System
This unit has a built-in “Radio Data System”
decoder system that supports broadcast stations
transmitting “Radio Data System” data.
When using the “Radio Data System” function,
always set the radio to FM mode.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
* The factory default setting is ON.
1. Set to system setup by long pressing [DISP]
button.
2. Press the [
] or [ ] button to select
“AF”.
3. Rotate the [VOLUME] knob to select ON or
OFF.
• AF ON:
“AF” indicator appears in the display and AF
function turns on.
• AF OFF:
“AF” indicator disappears in the display and
AF function turns off.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for
that region is received.
* The factory default setting is ON.
Notes:
• This function is disabled when a national
station such as BBC R 2 is bei ng
received.
• The REG function ON/OFF setting is
valid when the AF function is ON.
1. Set to system setup by long pressing
[DISP] button.
2. Press the [
] or [ ] button to
select “REG”.
3. Rotate the [VOLUME] knob to select ON
or OFF.
Manually tuning a regional station
in the same network
This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
TA (Trafc Announcement)
In the TA standby mode, when a trafc
announcement broadcast starts, the trafc
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Trafc programme (TP)
automatic tuning is also available.
* This function can only be used when “TP”
appears in the display. When “TP” appears,
this means that the “Radio Data System”
broadcast station being received has trafc
announcement programmes.
Setting the TA standby mode
If you press the [TA] button, “TA” lights in the
display and the unit is set into the TA standby
mode until a trafc announcement is broadcast.
When a traffic announcement broadcast
starts, “TRAF INF” appears in the display. If
you press the [TA] button while a traffic
announcement broadcast is being received,
the traffic announcement broadcas t
reception is cancelled and the unit goes
into the TA standby mode.
Cancelling the TA standby mode
As “TA” lits in the display, press the [TA]
button. The “TA” in the display goes off and
the TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station
has priority over a PTY broadcast
station.
Selecting PTY
Press [MENU] button, then rotate the
[VOLUME] knob to select PTY type,
press the [VOLUME] knob, the unit begin
searching.
CD/MP3/WMA Operations
This unit can playback MP3/WMA
les
Notes:
• If you play a WMA file with active DRM (Digital
Rights Management), there will be no audio.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy music tab, then
under Copy settings, unclick the Check box for
copy protected music. Then, reconstruct les.
Personally constructed WMA files are used at
your own responsibility.
Precautions when creating MP3/
WMA le
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz,
BIT rate 8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
File extensions
1. Always add a file extension “.MP3”,
“.WMA” to MP3, WMA file by using
single byte letters. If you add a file
extension other than specied or forget
to add the le extension, the le cannot
be played.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CZ102E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ102E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CZ102E

Clarion CZ102E User Manual - German - 16 pages

Clarion CZ102E User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info