580428
12
Zoom out
Zoom in
Previous page
1/16
Next page
Notes
of
installation
1.
Before installation, please make sure
proper connections are conducted and
the unit operates
normally. Improper
connection may result
in
damage to the
unit.
2.
Use only accessories designed and
manufactured for this unit and other
unauthorized accessories may
result
in
damage to the unit.
3.
Before installation, please fasten all power
cables.
4.
DO NOT install the unit
in
the place where
close to hot area to prevent damage to
electrical components such as the laser
head.
5.
Install the unit horizontally. Installing the
unit more than
30 degree vertically may
result
in
worse performance.
6.To prevent
electric spark, connect the
positive
pole first and then the negative
pole.
7.
DO NOT block the cooling fan exit to
ensure sufficient heating dissipation of this
unit, or it may
result
in
damage to this unit.
Unit
installation
Method
A
1.
Insert mounting bracket into dash board,
choose appropriate mounting tab according
to the gap width, bending the mounting
tab outwards with a screwdriver to fix the
mounting bracket
in
place.
2.
Slide the unit into the bracket until you hear
a
click sound.
Screwdriver
Mounting Bracket
11
CZ102
MethodS
Mounting Frame
M5x6
tPJ
~board
1.
Insert this unit directly to the opening of
the dashboard.
2.
Place
M5x6
cylindrical screw through the
holes of the mounting frame located inside
the opening to
holes of the unit and fasten
the screws to
left
& right.
Trim
ring
installation
Attach the trim ring around the front panel.
Take care of the top and bottom of the trim
ring and mount it
so
that all the hooks
are
locked.
_.
Bottom
6)
Removing
the
Source
Unit
Disassemble
trim
ring
1.
Push the trim ring to right and pull out the
right part.
2.
Push the trim ring to left and pull out the
left part.
Disassemble the
unit
1.
Switch off the power.
2.
Remove the panel.
3.
Remove the trim ring.
4.
Insert the removal keys straight back until
they lock, then pull the unit out.
5.
Disconnect all the wires.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CZ102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CZ102 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info