580505
35
Zoom out
Zoom in
Previous page
1/44
Next page
33
CMV1
English
7. SYSTEM SETTINGS
Audio Settings
You can adjust a audio effect or tone quality to
your preference.
Adjusting the bass
2-1. Select “Bass”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
gain from –7 to +7 (The factory default
setting is “0”).
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the treble
2-1. Select “Treble”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
gain from –6 to +6 (The factory default
setting is “0”).
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the balance
2-1. Select “Balance”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
balance of the right and left speakers.
* The factory default setting is “Center
(center). (Adjustment range: LEFT 12 to
RIGHT 12 (left 12 to right 12))
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the fader
2-1. Select “Fader”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
balance of the rear and front speakers.
* The factory default setting is “Center
(center). (Adjustment range: REAR12 to
FRONT12 (rear 12 to front 12))
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the non-fader volume
Adjust volume output from the unit’s non-fader
output terminal.
2-1. Select “Non Fader Volume”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to increase or
decrease volume.
* The factory default setting is “0”.
(Adjustment range: -6 to +6)
3-3. Press the [RETURN] button to return to the
previous mode.
Setting the BBE MP
(Sound Enhancement and Restoration
for compressed audio files)
BBE MP (Minimized Polynomial Non-Linear
Saturation) Process improves digitally
compressed sound, such as MP3, by restoring
and enhancing the harmonics lost through
compression. BBE MP works by regenerating
harmonics from the source material, effectively
recovering warmth, detail and nuance.
* This fuction is effective for the audio files in the
USB mode and the iPod mode (while the iPod
Output Formart is set toDigital”).
* The factory default setting is “Off”.
2-1. Select “BBE MP”.
To change audio setting
1. Press the [AUDIO] button to switch to the
audio adjustment selection display.
2. Then turn the [UP/DOWN] knob to select
the audio adjustment mode.
Each time you turn the [UP/DOWN] knob,
the sound adjustment mode changes as
following order:
BassTrebleBalance
FaderNon Fader Volume
(“BBE MP”)
* BBE MP” can be selected only in the USB/
iPod mode.
3. Press the [ENTER] button.
4. Turn the [UP/DOWN] knob to adjust the
selected audio mode.
5. After completing settings, press the
[RETURN] button to return to the previous
mode.
280PE3260E_EN.book Page 33 Tuesday, March 24, 2009 3:41 PM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CMV1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CMV1 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CMV1

Clarion CMV1 User Manual - German - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info