580426
21
Zoom out
Zoom in
Previous page
1/38
Next page
21
CMD5
English
Common Operations
AUX function
This system has rear RCA cables so you can
listen to sounds and music from an external
device connected to this unit.
Cellular telephone mute
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings.
* This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
Changing the adjustment setting
1. Press the [MENU] button to switch to the
adjustment selection display.
2. Press the [E] or [e] button to select the
adjustment item.
Each time you press the [E] or [e] button, the
adjustment item changes as following order:
DIMMERCLOCKLOUDNF
VOL SID DISPTV/VTRTV
AREATV DIVERAUX SENS
CONTRASTSCROLLA-CANCEL
TEL-SELTEL-SPTEL-SW
RESETSYSTEM CHECK
DIMMER”...
3. Turn the [VOLUME] knob to adjust the
selected setting.
* When “ENT” is blinking on the display, press
the [ENT] button to adjust the setting value.
4. After the adjustment is complete, press the
[MENU] button to return to the previous mode.
Notes:
The adjustment setting is canceled when not
operating for more than 10 seconds (except Clock
and Sirius ID setting).
When each mode is selected, the item shown in
grey will be displayed.
Dimmer Control
You can set the dimmer control.
* The factory default setting is “OFF”.
1. Press the [MENU] button to switch to the
menu mode.
2. Press the [E] or [e] button to select
DIMMER”.
3. Turn the [VOLUME] knob to select “ON” or
OFF”.
4. Press the [MENU] button to return to the
previous mode.
Setting the clock
1. Press the [MENU] button to switch to the
menu mode.
2. Press the [E] or [e] button to select “CLOCK”.
3. Press the [ENT] button.
4. Press the [E] or [e] button to select the hour
or the minute.
5. Turn the [VOLUME] knob to set the correct
time.
* The clock is displayed in 12-hour format.
6. Press the [ENT] button to store the time into
memory.
7. Press the [MENU] button to return to the
previous mode.
Note:
You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
boat's battery or take out this unit, the clock is
reset. While setting the clock, if another button or
operation is selected, the clock set mode is
canceled.
Setting the loudness
* The factory default setting is “ON”.
1. Press the [MENU] button to switch to the
menu mode.
2. Press the [E] or [e] button to select “LOUD”.
3. Turn the [VOLUME] knob to select “ON” or
OFF”.
4. Press the [MENU] button to return to the
previous mode.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarion CMD5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarion CMD5 in the language / languages: Dutch as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Clarion CMD5

Clarion CMD5 User Manual - English - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info