Manual Clarion adx 5655 rz (page 17 of 26) (English, French, Spanish)

165971

Zoom out

Zoom in

1/26

16 ADX5655z

280-7452-00

Other Handy Functions

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection

display.

2. Press Right button ¥ or Left button % to se-

lect “ANA SENS”.

3. Press Up button & or Down button * to set

the sensitivity of the spectrum analyzer.

You can choose one of “LOW”, “MID” or

“HIGH” for the sensitivity of the spectrum ana-

lyzer.

4. Press ADJ button

to return to the previous

mode.

Setting the speed of the spectrum

analyzer display

∗ The factory default setting is “HIGH”.

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection

display.

2. Press Right button ¥ or Left button % to se-

lect “ANA SPD”.

3. Press Up button & or Down button * to set

the speed of the spectrum analyzer display.

You can choose one of “LOW”, “MID” or

“HIGH” for the speed of the spectrum analyzer

display.

4. Press ADJ button

to return to the previous

mode.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed for radio or TV stations

and CDs. The numbers of titles that can be

entered for each mode are as follows.

1. Press FUNC button 7 to select the mode you

want to enter a title. (radio, CD, CD changer or

TV)

∗ Titles cannot be entered for MDs with this unit.

2. Select and play a CD or a CD in the CD changer,

or tune to an appropriate TV or radio station.

3. Press DISP button 3 and display the title.

Setting the clock

1. Press and hold ADJ button # for 1 second or

longer to switch to the adjustment selection

display.

2. Press Right button ¥ or Left button % to se-

lect “CLOCK”.

3. Press ENT button @.

4. Press Right button ¥ or Left button % to se-

lect the hour or the minute.

5. Press Up button & or press Down button *

to set the correct time.

∗ The clock is displayed in 12-hour format.

Press ENT button

to store the time into memory.

Press ADJ button # to return to the previous mode.

Note:

• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the car’s

battery or take out this unit, the clock is reset. While

setting the clock, if another button or operation is

selected, the clock set mode is canceled.

Switching the spectrum analyzer

display patterns

You can select one out of 4 patterns or set it to

off.

∗ The factory default setting is “PATTERN 1”.

Each time you press SPE-ANA button 4, the

spectrum analyzer display pattern changes in the

following order:

PATTERN 1 ➜ PATTERN 2 ➜ PATTERN 3 ➜

PATTERN 4 ➜ PATTERN 5 ➜ PATTERN 6 ➜

PATTERN 7 ➜ PATTERN 8 ➜ PATTERN 9 ➜

OFF ➜ PATTERN 1...

Note:

The spectrum analyzer display is unavailable dur-

ing these operations below;

• Seek tuning and auto store in radio mode.

• Mute or pause.

• When “NO DISC” or an error message appears

in the display.

Setting the sensitivity of the spec-

trum analyzer

∗ The factory default setting is “MID”.

CD changer mode Number of titles

CDC655z connected 60 titles

CDC655Tz connected 100 titles

CDC1255z connected 50 titles

Mode Number of titles

Radio mode 30 titles

CD mode 100 titles

TV mode 15 titles

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clarion adx 5655 rz in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clarion adx 5655 rz Manual

Product: