519305
7
Zoom out
Zoom in
Previous page
1/12
Next page
Zu beachten sind:
•VDE0100
•Bestimmungendesörtlichen
Energieversorgungsunternehmens
•AngabenaufTypenschild
•TechnischeDatenSeite4
•Das Gerät muss geerdet werden!
Das Gerät ist über eine Schutzkontakt-
steckdose anzuschließen, diese muss
nach der Installation des Gerätes frei
zugänglich sein.
Soll der Speicher fest an das Wechsel-
stromnetz angeschlossen werden
(Geräte anschlussdose), muss er über
eine Trennstrecke von mindestens 3 mm
allpolig vom Netz getrennt werden kön-
nen.
Die Installation mit festverlegter
Anschlussleitung ist nicht zulässig.
1 Temperaturregler
2 Bimetallsicherung
3 Heizkörper
4 Kontrolllampe
5 Anschlussklemme
Warning:
•Theinstallationmustcomplywith
current IEC regulations or national
local regulations or any particular
regulations, specified by the local
electricity supply company!
•Observetherating plate and tech-
nical specifications on page 4
•Theunitmustbeearthed!
A protective earth plug socket is required
for connecting the device, which must
be freely accessible after the device has
been installed.
If the water heater is to be connected
permanently to AC mains circuit (con-
nector socket), an isolator with at least
3 mm separation on all poles must be
used.
The unit must not be installed with fixed
connection cable.
1 Thermostat
2 Bimetal thermal safety
3 Heating element
4 Control light
5 Connecting terminal
Schaltplan
Circuit diagram
8 Elektroanschluss Electrical connection
9 Inbetriebnahme Commissioning
ϑ
ϑ
>
N
5
1
4
3
2
230 V ~
L
1.
2.
7
1. Warmwasserventil der Armatur öffnen
oder Einhandmischer auf »warm«
stellen, bis Wasser blasenfrei austritt.
2. Erst danach Netzstecker einstecken
und Temperatur wählen.
Trockenganggefahr!
Bei Verwechslung der Reihenfolge
spricht der Temperaturbegrenzer an.
In diesem Fall ist Wasser einzufüllen
und das Gerät kurzzeitig vom Netz
zu trennen.
Übergabe
•ErklärenSiedemBenutzerdieGeräte-
funktion. Machen Sie ihn besonders
auf die Sicherheitshinweise und das
Tropfen der Armatur beim Aufheizen
aufmerksam.
•ÜberreichenSiedieGebrauchs-und
Montageanweisung dem Benutzer.
1.Openhotwatervalveofthefittingor
set single-lever mixer to »hot« until
water flows free of bubbles.
2.Onlyaftersteponepluginmainsplug
and select temperature.
Risk of running dry!
If you confuse the sequence, the
temperature fuse will react. In this
case you have to fill the water
heater with water and disconnect
the electric supply for a short time.
Changing hands
•Explainthefunctionoftheunittothe
user, in particular, call his attention to
the safety instructions and the drip-
ping of the fittings when heating up.
•Handovertheinstallationand
operating instructions to the user.
D
GB
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clage S 5-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clage S 5-O in the language / languages: English, German as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info