455904
6
Zoom out
Zoom in
Previous page
1/10
Next page
Features Functions Rear Panel&
18. Main Power Switch
19. AC Connection
20.RCA Master Outputs
21. Channel 3: LINE 3 RCA Input Jacks
22.Channel 3: PHONO 3 Input Jacks
This is the main power ON/OFF button. The READY LED will glow led when power is ON.
Before main power is applied, be sure you have made all connections to the mixer. Also be
sure your amplifier(s) is(are) tuned off. Remember to avoid damaging pops, the mixer should
be powered on first and turned off last.
This connector is used to supply main power to the unit via the included AC adaptor.
The Master Output includes a pair of RCA UNBALANCED JACKS . The RCA jacks send a low
current unbalanced output signal.
These Jacks are used for line level inputs. Connect CD players or Tape Decks to LINE inputs.
Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers
should also be connected to LINE inputs. Turntables should only be connected to “Phono”
inputs. The red colored RCA jack represents the right channel input and the white represents
the left channel input.
20
21 22
23
18
19
24
5
The dual LED’s indicators are used to indicate the master output level.
Selects which source will be active based on what you have connected to the rear panel input
section(Phone/USB/Line).
always set to zero before turning the unit on.
16. LED Monitor Display
17. Input toggle switch
Connect turntables equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use
MM pick-up cartridges).
23 GND (GROUND TERMINAL)
24.USB Terminal
.
Connect each of your turntables ground leads to either of the three ground terminal. This will
reduce the humming and popping noises associated with magnetic phono cartridges.
After hooking up your computer with the USB connections, your computer will detect them
respectively as an external sound card (USB Code). You may either play music on your
computer or send it via the USB connections as a signal source to the unit; alternatively ,you
may record the master output signal on your computer using the USB connections.
headphones on. Be sure the CUE MIXINGKNOB (13) is turned to the “CUE” position to hear
the selected channel source.
This rotary knob is used to control the master output level (volume). To avoid distorted output
try to maintain an average output signal level below “OVER”. Be sure this volume control is
15. Master Volume Control
After
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic PRO-3 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic PRO-3 USB in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info