455896
6
Zoom out
Zoom in
Previous page
1/20
Next page
5
CONTROLS AND FUNCTIONS TOP PANEL
CONTROLS AND FUNCTIONS REAR PANEL
34
36
31
33
35
32
CONTROLS AND FUNCTIONS REAR PANEL
23. RELOOP BUTTON – If a SEAMLESS LOOP has been made, but the Player is not actively in SEAMLESS
LOOP mode (a loop is not playing), pressing the RELOOP BUTTON will instantly reactivate the
SEAMLESS LOOP mode. To exit loop, press the OUT BUTTON. LOOP and RELOOP will appear in the
LCD DISPLAY when the RELOOP function is available.
24. MASTER VOLUME CONTROL – This knob is used to control the master output level. To avoid speaker
damage that may be caused by excessive volume, be sure this knob is always set to the lowest level
before turning the unit on(only available when MIXER OUTPUT is ON).
25. SD CARD SLOTS – These are the SD slots where you insert your SD cards. One card per slot. Gently
insert your SD Card into the slot. To eject your card, put the Media Operator in pause mode, and then
press the SD Card gently. The SD Card should "Pop" out. The preferred file format is Mp3.
26. USB PORT – This is the USB port where you insert your USB mass storage device for playing MP3 files.
27. MICROPHONE VOLUME CONTROL – This knob controls the output volume of the MICROPHONE (only
available when MIXER OUTPUT is ON).
28. INPUT FADER (Channel Fader) – These faders are used to control the output signal of any source assigned
to its particular player (only available when MIXER OUTPUT is ON).
29. PITCH SLIDER – This slider is used to adjust the playback pitch percentage. The slider is a set adjustment
and will remain set until the pitch slider is move or the pitch function has been turned off. This adjustment
can be made with or without a music source device (USB stick or SD card) in the player. The pitch
adjustment will remain even if a music source device (USB stick or SD card) has been removed and will
reflect on any other music source device inserted into the player. That is to say, if you set a +2% pitch on
one music source device, remove that device and insert another, that music source device too will have a
+2% pitch. The amount of pitch being applied will be displayed in the LCD.
30. LCD DISPLAY – This high quality LCD display indicates all the functions, as they are occurring. This
display is viewable at several comfortable angles.
31. AUDIO OUTPUTS – AUDIO OUTPUT from player 2: Output for the audio signal from player 2. Use the
supplied RCA phono leads to connect these outputs to the CD/line input of an external mixing unit.
32. CONTROL START sockets – This remote control is only compatible with certain mixers. If you are using a
mixer with fader start function, use this connector to plug into your fader start compatible mixer.
Attention: Please note that these sockets must never be connected with any voltage.
33. POWER CONNECTOR – Plug in power adapter here. It is a switching adapter to suitable to each voltage.
34. AUDIO OUTPUT from player 1 or mixer –Output depending on the setting of the MIXER OUTPUT MODE.
35. BALANCED OUTPUTS JACKS These jacks send a balanced output signal.
36. MICROPHONE – This jack is used to connect a microphone to the device. The volume output level for this
microphone will be controlled by its own respective volume knob.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic MPSD-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic MPSD-2 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info