455894
5
Zoom out
Zoom in
Previous page
1/15
Next page
4
17. CUE BUTTON –Pressing the CUE button during playback immediately pauses playback and returns the
track to the last set cue point. The CUE LED will glow when the unit is in cue mode. The LED will also flash
every time a new CUE POINT is set. The CUE button can be held down to momentarily play the music.
When you release the CUE button it instantly returns to the CUE POINT. You can also tap the CUE button
to create a STUTTER EFFECT.
18. JOG WHEEL – This jog wheel serves 3 functions depending on the mode you are working in.
The wheel works as a pitch bend during Playback. Turning the wheel clockwise can increase the pitch
percentage up to 100%, and turning the wheel in the counterclockwise direction can decrease the pitch
percentage down to -100%. The pitch bend will be determined on how long you turn the jog wheel
continuously.
The jog wheel acts as a slow frame search (1/75 sec) control when the music is not playing but either paused
or set to a cue point. To set a new cue point, spin the wheel then press PLAY or IN when you have
determined the proper position. Press CUE to return to the “CUE POINT”.
If the search function is active, you will be able to search at a higher speed through all the tracks.
19. POWER SWITCH button – It is used to switch the power on/ standby. When power cord plug into the rear
socket to be the STANDBY mode, all LED are off but STANDBY LED.
(a) In the STANDBY mode, press power button to POWER ON,” Please insert memory device” is
displayed in the LCD.
(b) In the POWER ON mode, press and hold the power button more than 2sec. to standby.
20. TEMPO LOCK BUTTON This button is used to choose the tempo lock mode and the pitch control mode.
Tempo lock mode allows speeding up or slow down playback speed without altering the tonality of music.
21. SGL/CTN BUTTON – You can choose between “single track mode” and “continuous play”.
Continuous play:
the complete memory device will be played without interruption. (mostly used in pubs)
Single track:
player stops at the end of each track and waits at the beginning of the next track. (mostly
used by deejays) Push the SGL/CTN button for more than 1 second to switch between normal and “auto
cue” mode. See basic operation for more information.
22. POWER CONNECTOR – Plug in power adapter here. It is a switching adapter to suitable to each voltage.
23. FADER START – This connection allows two players to be linked for relay play. This can also be
connected to a mixing board that supports automatic fader start.
24. AUDIO OUTPUTS Output for the audio signals is from each player. Use the supplied cinch/cinch cables to
connect these outputs to the CD/line inputs of your mixing unit.
CO
NTR
O
L
S
AND F
U
N
C
TI
O
N
S
CONTROL UNIT
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic MPSD-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic MPSD-1 in the language / languages: English as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info