455890
4
Zoom out
Zoom in
Previous page
1/18
Next page
Page 4 of 18
General Functions and Controls
1. USB PORT 1 - This is the USB port where you insert your USB mass storage device (up
to 32gb)
2. SOURCE SELECT - Use this button to select CD/USB1/USB2/MIDI music. Hold the
SOURCE SELECT button for 2 seconds to enter MIDI mode.
3. BRAKE, START DIAL
a. BRAKE DIAL – When the BRAKE dial is rotated to MIN, play stops instantly; when
the dial is rotated from MIN up to MAX, play slows down before coming to a
complete stop.
i. When in VINYL mode, the BRAKE dial determines the deceleration speed
until play stops, when the top of the jog wheel is held down
(Note: It is advised
to hold the side of the jog wheel with one hand while doing this as any movement from the jog
wheel at this point will cause the unit to go in to scratch mode)
ii. When in CD DJ mode, this BRAKE dial determines the deceleration speed
until play stops when the PLAY/PAUSE button is pressed.
b. START DIAL - When the START dial is rotated to MIN, play will start instantly.
When the dial is rotated between MIN up to MAX, play starts slowly before reaching
full playback speed.
i. When in the VINYL mode, this START dial determines the acceleration speed
until full playback speed is reached when using the jog wheel to scratch,
backspin or stop the track.
ii. When in the CD DJ mode, this START dial determines the acceleration speed
until full playback speed is reached when the PLAY/PAUSE button is pressed.
4. TEMPO RANGE BUTTON - Press the button to choose pitch percentage adjustment
percentage. ±6%, ±10%, ±16%, and ±100%. With this button you can also switch the
PITCH SLIDER on or off by pressing and holding it for 2 seconds.
5. KEY LOCK - This button turns on or turns off the KEY LOCK function. This function
allows you to use the PITCH SLIDER to speed up or slow down playback speed but
without altering the tonal pitch of the track.
6. TOGGLE BUTTON (WHEEL MODE) - Press the TOGGLE button to select the operation
mode: VINYL/CD DJ/A.CUE SCRATCH.
a. VINYL - When wheel mode is set to VINYL, use the JOG WHEEL to activate the
scratch effect by touching the surface of JOG WHEEL and moving it clockwise and
anti clockwise.
b. CD DJ - When wheel mode is set to CD DJ use the JOG WHEEL to pitch bend and
frame search.
c. A.CUE SCRATCH
i. IN PLAYBACK MODE - While music is playing, the JOG WHEEL can be used
to return the unit to last set CUE point (using the IN button). Simply touch
the JOG WHEEL and unit will immediately return to the last set CUE point.
ii. IN CUE MODE - While the music is not playing (CUE mode), tapping the JOG
WHEEL will start the playback. Hold your finger on the jog wheel to continue
playback. When your finger is released the music will stop and go back to
the last CUE point.
7. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. Move the
slider down to speed up the music and move the slider up to slow down the music.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic MPCD-X3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic MPCD-X3 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info