Manual Citronic MPCD-4 (page 7 of 47) (English)

34400

Zoom out

Zoom in

1/47

12. Pitch selection LEDs

These LEDs give a visual indication of the pitch range that is currently selected as follows:

• ±4% - The % (11) button will be illuminated red

• ±8% - The % (11) button will not be lit and the 8% LED will be illuminated in red

• ±16% - The % (11) button will not be lit and the 16% LED will be illuminated in blue

• ±100% - (CD-A ONLY) The %, 8% and 16% will be illuminated

13. Time Select Button

The time select function will switch the time value on the LCD display from Elapsed play time, track remaining

time and total remaining time. Note: Total remaining time is not available on MP3 discs.

The Time button is dual function, it will also activate relay play mode, see section on activation further in the

is manual.

14. SGL/CTN Button

This function allows the user to select single play (when the track reaches the end the CD will stop) or

continuous play (when the track ends the next track on the CD will play in order)

15. FL Tube Display

This highly visible display, gives information on selected feature and track/CD information See “Display

Section” for more detail.

16. Pitch Slider

This slider is used to set the pitch of the playing CD. To activate the slider press (9) the slider can then be

used to adjust the pitch/BPM of the track. The amount of pitch adjustment is determined by the pitch range

select button (11)

17. Seamless Loop IN Button

IN – This button has two functions. It can be used to set a CUE point on the fly, press once at the desired

position to set an instant CUE point, this also sets the beginning of the loop feature.

18. Seamless Loop OUT Button

OUT – This button when pressed selects the end point for the seamless loop. Press once to set the end point

the loop will then begin from the IN point and continuously loop until the OUT button is pressed once again to

exit the loop feature

19. Reloop Button

RE-LOOP – This button is used to re-enter the seamless loop and can be pressed at anytime as long as the

loop created is on the same disc. This button can also be used to create a stutter when pressed repeatedly.

20. Memory Button

This button allows the user to program up to 3 cue points or 3 loops to the 3 ‘Memory Bank Buttons’ (21) the

loops or cue points can be recalled at any time even when the disc has been removed and reloaded at a later

time. Pressing and holding this button for 4 seconds will save the cue/loop points into the IMS memory, so

when the disc is next inserted the cue/loop points will be recalled.

21. Memory Bank

These 3 buttons are used to store 3 cue points if the cue point is the beginning of an active loop the memory

bank will save the loop information. These buttons can also be used to stutter the music, pressing repeatedly

will return the track to its cue point but remain in play mode.

22. BPM Button

This button will switch between Auto and Manual BPM.

23. TAP button

Use this button to manually TAP the BPM of a track. This is particularly useful when a track has a weak or no

continuous beat.

24. Scratch Button

This button will activate the scratch mode; this is available for both CD and MP3. The button will illuminate

Blue when active. Using the jog wheel (2) move in the desired direction to produce the scratch, when the jog

wheel is not moving normal play will resume.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Citronic MPCD-4 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Citronic MPCD-4 Manual

Product: