455910
5
Zoom out
Zoom in
Previous page
1/5
Next page
SPECIFICATIONS
Model
(Stock Code)
Power Supply
12Vac 1000mA (included)
Phantom Power
Switchable +48V (XLR inputs)
Frequency Response
20Hz - 20kHz
Mic/Line inputs (bal/unbal)
Stereo Input (unbal)
6.3mm jack/RCA (-8 to +15dB / +13 to +60 parallel)
SNR: Mic Inputs
120dB E.I.N.
SNR: Line Inputs
95dB E.I.N.
SNR: Stereo Input
96dB E.I.N.
EQ: High
10kHz, ±15dB
EQ: Mid
700Hz, ±15dB
EQ: Low
50Hz, ±15dB
Outputs: Main (L + R)
6.3mm jack (+28dBu balanced / +22dBu unbalanced)
Aux, EFF, REC out
unbalanced 6.3mm jack (+22dBu)
Phones Output
+15dBu stereo 6.3mm jack
Dimensions (mm)
Weight
Troubleshooting
No power LED on control panel
Ensure power adapter is working and connected properly
Ensure mains outlet voltage is as stated on adapter
Power LED is on but no other LEDs and no output
Check input signals and condition of connection leads
Check jack is connected to input and not channel insert
Check GAIN is not too low on channel input
Check channel fader is not fully down
Check MAIN fader is not fully down
Disconnect channel insert (if used) and check for correct wiring
For condenser mics, turn down MAIN fader and check phantom is on
Power light and output LEDs lighting but no output
Check output connections to amplifier or recorder
Check amplifier or recorder levels are not turned fully down
USB/SD player will not play audio from media
(CM-LIVE models only)
Press PLAY on transport controls
Check memory device is connected properly (remove and re-insert)
Check file types standard compressed digital audio files required
Check memory device works on a PC or Mac for standard playback
USB device not recognised by PC or Mac
(CM-STUDIO models only)
Check version and/or updates for operating system
Follow on-screen trouble-shooter or diagnostics in Windows or OS
Check USB connection (disconnect then reconnect USB lead)
Seek advice from your PC or Mac operating system provider
Output is very loud or distorted
Check level of input signal is not too high
Reduce channel GAIN and EQ settings
Reduce channel and MAIN faders levels
Ensure Hi-Z line level input(s) not connected via XLR
Check output levels of equipment connected via channel inserts
Check AUX and EFFECT level controls and reduce if necessary
Check for high gain recording of media files on USB/ SD (CM-LIVE)
Check input gain level on recorder or recording software
Output is working but at very low level
Check input audio source level is not too low
Ensure low impedance line or mic signal is not connected via jack
Increase channel GAIN control and EQ settings if turned down
Increase channel and MAIN faders levels
Check output levels of equipment connected via channel inserts
Check for quiet recording of media files on USB/ SD (CM-LIVE)
Check input gain level on recorder or recording software
Feedback (loud squealing or howling from mics)
Face microphone away from speakers and monitors
Reduce channel GAIN level and EQ level(s)
Reduce AUX and/or EFFECT levels
Reduce channel and/or MAIN fader levels
Note: for further troubleshooting, refer equipment to qualified service personnel for testing
© Citronic 2011
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic CM10-LIVE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic CM10-LIVE in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info