455889

Citronic CD-1.4 Manual

5
Zoom out
Zoom in
Previous page
1/12
Next page
17. PITCH BEND BUTTONS
(-) PITCH BEND button – The (-) pitch bend function creates a momentary “Slow Down” in the CD’s
pitch speed (Beats per minute - BPM) when the PITCH function is activated. This function allows the beats
between two CD’s or any other music source to match.
This is a momentary function. When the button is depressed the pitch speed will automatically return to
PITCH SLIDER'S selected pitch. Holding down this button will give a maximum of -16% pitch. Be sure to
remember that this function is a momentary pitch adjustment, for a more precise adjustment use the
PITCH SLIDER to match the BPM’s with another playing music source.
(+) PITCH BEND button – The (+) pitch bend function creates a momentary “BUMP” in the CD’s pitch
speed (Beats per minute - BPM) when the PITCH function is activated. This function allows the beats
between two CDs or any other music source to match. This is a momentary function. When the button is
depressed the pitch speed will automatically return to PITCH SLIDER'S selected pitch. Holding down this
button will give a maximum of +16% pitch. Be sure to remember that this function is a momentary pitch
adjustment, for a more precise adjustment use the PITCH SLIDER to match the BPM’s with another
playing music source.
18. LOOP IN button – This function allows you to set the starting point of a loop.
19. LOOP OUT button – This button is used to set the ending point of a loop. A loop is started by pressing the IN
BUTTON, pressing the OUT BUTTON sets the loop ending point. The loop will continue to play until the OUT
BUTTON is pressed once again.
20. RELOOP button – If a LOOP has been made, but the CD Player is not actively in LOOP mode (a loop is not
playing), pressing the RELOOP BUTTON will instantly reactivate the LOOP mode. To exit the loop, press
the LOOP OUT BUTTON.
21. PITCH PERCENTAGE SELECTOR – Choose from pitch percentages of 4%, 8%, and 16%.
22. CONTROL START socket – These sockets are to connect to a mixer using a 3.5mm jack plug to give
remote start capability. When the switch contacts are shorted the respective unit will play, and similarly when
the switch contacts are open the player will be in pause mode.
23. CONTROL connector – Connect this connector to the REMOTE connector on the main unit using the
included control cord.
GENERAL FUNCTIONS CONTROL UNIT
4
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citronic CD-1.4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citronic CD-1.4 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info