616653
266
Zoom out
Zoom in
Previous page
1/276
Next page
Tipper body
264
SERVICING
Reservoir
Check and top up the fluid level regularly. Replace the fluid
annually. Replace the fluid if it contains water.
Check the condition of the hydraulic hose and the sealing of the
hydraulic system regularly.
Pump and motor
Requires no servicing, the ball bearings are lubricated for life and
the plain bearings by the pumped fluid.
Lubrication
The tipper body and ram pivots do not have grease nipples.
Lubricate regularly the hinges and retainers for the tipper body sides
as well as the catches for the rear tipper body side.
Sub-chassis and tipper body
For maximum life, we recommend that you clean your tipper body
by washing it down regularly with hose.
Touch-in the paint chips quickly to avoid the spread of rust.
After 8 months of use, check the tightening torque of the
fixings of the underbody to the chassis (following the
recommendations of the body converter).
Cleaning the valve slider
Remove the plug 244A taking care to recover the ball.
Using a wide screwdriver, remove the bore / piston bolt
assembly.
Check that the piston slides smoothly and remove any
impurities. Pass a magnet over if there is any swarf present.
Refit the assembly and ensure that the piston slides smoothly.
Retain the ball with some grease on the plug for reassembly.
Bleed the hydraulic system.
Bleed the electro-hydraulic unit
Remove the hexagonal plug 257.
Slacken by a half turn the bolt 587 located inside, using a
hexagonal 6 mm spanner.
Operate the electro-hydraulic unit for a few moments by
pressing the raise button.
The tipper body does not rise, or very slowly. When fluid flows
from the orifice, the system is bled.
Retighten bolt 587 and refit the plug 257, check that the tipper
body lowers correctly.
266


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citroen Jumper 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citroen Jumper 2015 in the language / languages: English as an attachment in your email.

The manual is 9,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Citroen Jumper 2015

Citroen Jumper 2015 User Manual - German - 276 pages

Citroen Jumper 2015 User Manual - Dutch - 276 pages

Citroen Jumper 2015 User Manual - French - 276 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info