This driving assistance function
allows you to drive at the speed of
your choice without the need to action
the accelerator.
This system is available above
40 km/h (25 mph), with 4th gear
or higher on a manual gearbox or
2nd gear or higher on an automatic
gearbox.
Note: Information relating to the
cruise control is displayed in zone
A of the instrument panel.
To select the function
Turn control 1 to position "REG".
To select a cruising speed
At the time you select the function
via the control 1, there is no cruise
speed previously memorised:
Note: you can use successive
presses to modify the cruise speed
in steps of 1 mph and a continuous
press to jump in steps of 5 mph.
Accelerate to the desired speed,
then press button 2 or button 4. The
cruise speed will then be memorised
and displayed in zone A on the
instrument panel.
You can then release the accelerator
pedal. The vehicle will automatically
keep to that chosen speed.
Note: The vehicle speed may vary
slightly from that memorised.
CRUISE CONTROL
Adjustment of the memorised
speed while cruise control is in
operation
To adjust the memorised speed,
displayed in zone A, press on:
- button
4 to increase the speed,
- button
2 to decrease the speed.
To exceed the cruise speed
temporarily
While cruise control is in use, it is
always possible to go above the
cruise speed simply by pressing
the accelerator pedal (for example
to overtake another vehicle). The
speed displayed in zone A ashes.
You have only to release the
accelator pedal to return to your
cruise speed.
Note: if during cruise control the
system cannot keep to the cruise
speed (e.g. on a steep descent),
then the speed ashes. If necessary,
brake to curb your speed.
