PRACTICAL INFORMATION
Changing foglamp/reversing lamp
bulbs
open the boot,
press on the tabs using 2 screwdrivers,
disconnect the lamp connector,
turn the bulb holder by a quarter turn,
remove the bulb and replace it.
To refi t, carry out these operations in re-
verse order.
Changing the third brake lamp bulbs
(4 W5W bulbs)
open the boot,
remove the two plugs located on the
boot inner panel,
press on the body of the lamp with
2 screwdrivers to remove it from its
housing,
turn the corresponding bulb-holder
a quarter turn,
pull the bulb and replace it.
To refi t, carry out these operations in re-
verse order.
Changing the number plate lamp
bulbs (W5W)
insert a thin screwdriver into one of
the lens’ exterior holes,
push it outwards to unclip,
remove the lens,
pull the bulb and replace it.
To refi t, carry out these operations in re-
verse order.