Your vehicle has been approved in
accordance with the new ISOFIX
regulation .
The seats * , represented below, are fi t-
ted with regulation ISOFIX mountings:
These are three rings for each seat: This ISOFIX mounting system
guarantees you fast, reliable and
safe fi tting of the child seat in your
vehicle.
The ISOFIX child seats are fi tted
with two locks which are secured
easily on these lower rings A .
Some also have an upper strap
which is attached to the upper
ring B .
- two lower rings A , located
between the vehicle seat back
and cushion, indicated by a
label,
* According to version.
- an upper ring B for securing the
upper strap, referred to as the
TOP TETHER , indicated by a
marking on the rear seat back
panel.
To attach this strap, raise the
vehicle seat's head restraint
then pass the hook between
its rods. Then fi x the hook
on the upper ring B and tighten the
upper strap.
The incorrect installation
of a child seat in a vehicle
compromises the child's
protection in the event of an
accident.
For information regarding the ISOFIX
child seats which can be installed in
your vehicle, consult the summary
table for the location of the ISOFIX
child seats.
