III
34
B. Adjustment of temperature
Rotate the control from blue (cold) to red (hot) to adjust
the temperature to your preference.
C. Adjustment of air flow
When you switch on the ignition, rotate the control to
obtain a flow of air that is comfortable.
Air inlet
Make sure that the exterior air inlet grille and manifold
at the base of the windscreen is clean and free of dead
leaves, snow, etc..
If you wash the vehicle with a high pressure jet, avoid
targeting the air inlet grille.
Air circulation
In order to obtain a perfectly even distribution of air,
you should take care not to obstruct the exterior air
inlet grille, the air vents, the air ducts, or the air outlets
to the passenger footwells.
The air vents to the face have grilles for orienting the
flow of air.
Pollen filter
Your installation has a filter for excluding dust.
This filter has to be changed at the prescribed
maintenance intervals (see the Maintenance Guide).
D. Recirculation of air / Outside air
Recirculation of air inside the cabin is useful
for isolating the passenger compartment from
odours or fumes coming from outside.
A combined use of both the air conditioning
and air recirculation for only a short time will optimise
the performance of the air conditioning.
Used in a climate with high humidity, recirculation of
air carries the risk of the windows misting.
As soon as possible, move the manual control D to the
right, to be in the "Exterior air" position, so as to avoid
any risk of poor air quality.
Entry of air from the outside helps to prevent
and eliminate misting of the windscreen and side
windows.
V E N T I L A T I O N - H E A T I N G
A I R C O N D I T I O N I N G
