62 63
4. Press the upper right button (B) twice to enter the
time difference setting status.
• Each time you press the upper right button (B), the
“Daylight saving time ON/OF”, “City display
SET/OFF” and “Time difference setting” correction
location changes. The new correction location will
begin flashing.
5. Turn the crown to set the time difference.
• Turn to the right to display (+) in the world time
section and display time differences with UTC in
15-minute units in the time display section.
• Turn to the left to display (–) in the world time
section and display time differences with UTC in
15-minute units in the time display section.
• Turn the crown continuously to change the time
difference quickly. Turn crown to the right or left to
stop the quick movement.
6. Press the crown back into its normal position.
* If the time difference is not set, the HOM city will
not be displayed regardless of whether the display
is set to SET or OFF.
0:00 flashes
When a time difference of +5
hours 45 minutes with UTC is set
[Time difference setting status]
<Setting the desired time difference>
• Any time difference can be set between the HOM city and the UTC time, in units of 15
minutes. (Range of -12 to +14 hours from UTC)
• The radio wave received at HOM will be from the transmitter assigned to the city that has the
most similar time difference with UTC.
1. Pull the crown out to position 1 and turn to align the mode hand with WT-S (world time set
mode).
2. Pull the crown out to position 2 to enter the world time correction status.
3. Turn the crown to call up HOM for the world city.
• ON or OF flashes and the watch enters the daylight saving time setting status.
[Digital display 2]
Daylight saving
time ON/OF flashes
Turn the crown to
select HOM
[Digital display 1]
