555966
187
Zoom out
Zoom in
Previous page
1/192
Next page
SR260C_Polish_090402.doc SIZE: 140x75mm SCALE 1:1
2009/4/14
-Po 17-
funkcję matematyczną) lub wprowadzenie danych (liczb). Program
pozostanie w pamięci kalkulatora nawet po wyłączeniu zasilania. W
obliczeniach można użycz więcej niż jedną zmienną.
W trybie programowania (PGM) do pamięci kalkulatora można
zapisać kolejność obliczeń lub program. Aby przejść do trybu
programowania, należy naciśnąć klawisze [ 2ndF ] [ PGM ]. Na
wyświetlaczu pojawi się wskaźnik PGM.
Teraz można rozpocząć wprowadzenie programu - tak, jak gdyby
obliczenia te miały być wykonane jednokrotnie, za jednym wyjątkiem:
przed wprowadzeniem zmiennych należy naciskać klawisze [ 2ndF ]
[ [X] ]. Pierwszy wynik będzię wyświetlony już w trakcie wprowadzania
programu.
Uwaga : Przy naciśnięciu kolejno klawiszy [ 2ndF ] [ [X] ] oraz [
] lub
przy wprowadzeniu liczby i naciśnięciu kolejno klawiszy
[ EXP ], [ +/– ], [ ) ] lub [ CE ], wprowadzoną liczbę oraz
pierwszą funkcję wprowadzoną bezpośrednio po tej liczbie
kalkulator zinterpretuje jako jedną zmienną - one nie będą
zapisane w programie jako obrębne operacje.
Pamiętaj: maksymalna długość programu to 40 kroków. Przy próbie
wprowadzenia 41-ej kroków na ekranie wyświetli się wskaźnik E. Aby
wykasować błąd, naciśnij klawisz [ ON/C ].
Aby skończyć wprowadzanie programu, należy powtórnie nacisnąć
klawisze [ 2ndF ] [ PGM ]. Wskaźnik PGM zniknie z ekranu i kalkulator
wyjdzie z trybu programowania. Aby powtórzyć obliczenia dlażnych
wartości zmiennych, naciśnij klawisz [ RUN ].
Po naciśnięciu klawisza [ RUN ] można rozpocząć wprowadzanie
zmiennych. Zmienne należy wprowadzać zgodnie z kolejnością ich
występowania w równaniu; po wprowadzeniu każdej zmiennej należy
naciska
ć klawisz [ RUN ]. Wyniki będą wyświetlane na ekranie.
Zapisane w pamięci programy będą automatycznie skasowane po
wciśnięciu klawiszy [ 2ndF ] [ PGM ]. Dlatego nie należy wybierać
trybu programowania jeśli nie mamy zamiaru wprowadzać nowego
programu.
Kalkulator można zaprogramować tak, aby wyświetlal wyniki
pośrednie. Pod czas wprowadzania programu (w trybie PGM) należy
nacinąć klawisz [ = ] w miejscu, w którym chcemy zobaczyć wynik
pośredni. Po czym należy wcisnąć klawisze [ 2ndF ] [ HALT ], i dalej
wprowadzać program.
Pod czas wykonywania programu, po każdym wyświetleniu wyniku
pośredniego należy nacisnąć klawisz [ RUN ] aby kontynuować
obliczenia. Kalkulator można zaprogramować tak, by wykonywał on
kolejno obliczenia za pomocą dwu lub więcej wzorów.
187


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen SRP-265N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen SRP-265N in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info