556020
7
Zoom out
Zoom in
Previous page
1/24
Next page
SR8B2-E.RTF SIZE : 140x140mm SCALE 2:1
-E7-
HYP : Appears when the hyperbolic function has been selected.
( : Appears when you press [ ( ]. It shows the present level of
nesting.
( | ) : Appears when you press [SHIFT] [[x]] in the program learn
mode and when program execution halts to let you enter a
variable. The number in brackets shows the number of the
place of the variable, and goes from 1 - 40.
OVERFLOW OR ERROR CHECK
An overflow or error is indicated by "E". Stop further calculations.
An overflow or error occurs when:
a) An intermediate or final calculation result exceeds 1 x 10
100
(including memory calculations).
b) You try to divide by zero.
c) The number of low priority storage levels exceeds 6 in a
parentheses calculation or nesting parentheses exceed 7 in one
level. (Even if the number of levels is within 6, an error might
occur if you are using memories Ka or Kb, or program memories.)
d) You try to use [SHIFT] [Ka
X
Æ
K
] or [SHIFT] [Kb
X
Æ
K
] while memories
Ka and Kb are being used for low-priority calculation storage.
e) You make a calculation that is out of the range for functional and
statistical calculations.
f) You try to store over 40 steps in a program.
To clear calculations after an overflow condition, press [ON/C].
Memory Protection:
Memory contents are protected against overflow or error conditions. If
a memory operation would result in the memory value exceeding
1 x 10
100
, the calculator displays E and does not change the value in
memory.
REPLACING THE BATTERIES
Your calculator is powered by two alkaline-manganese batteries.
When the display dims, replace the batteries.
1. Unscrew the two screws on the back of the calculator.
2. Insert a flat bladed screwdriver into the slot between the upper and
lower case then carefully twist it to separate the case.
3. Remove both batteries and dispose of them promptly. Never allow
children to play with batteries.
4. Wipe off the new batteries with a dry cloth to maintain good contact.
5. Insert the two new batteries with their flat sides (plus terminals) up.
6. Align the upper and lower cases then snap them to close together.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen SRP-145T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen SRP-145T in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info