759603
15
Zoom out
Zoom in
Previous page
1/40
Next page
184 185
6. Using the Chronograph
The chronograph can measure up to 59'59"95 in 1/20 second units. It will then be reset
to 0 second.
<Reading the chronograph>
Pull out the crown to position 1 and turn it to align the mode hand with CHR
(chronograph). Push the crown back into its normal position.
The second and function hands advance rapidly to the
0 position. The watch enters the chronograph mode.
The second hand changes to the chronograph.
When starting from the 0 second position, the
second hand will make one quick full rotation and
move at 1-second intervals thereafter.
The function hand changes to the chronograph
minute hand, moving at 1 minute intervals, or the
1/20 second hand.
If the lower right button (A) is pressed while the
chronograph is stopped, the function hand shows
chronograph 1/20 second as long as it is pressed.
When selecting the chronograph mode, the hour
and minute hands may show the mode they were
previously in.
Mode
switching
position
Button (A)
Second hand
(chronograph second)
Function hand (chronograph
minute/chronograph 1/20 second)
Button (B)
<Chronograph measurements>
Pull out the crown to position 1 and turn it to align the mode hand with CHR
(chronograph). Push the crown back into its normal position.
1 A con rmation tone will sound each time you
press the upper right button (B) to start and stop
the measurement.
2 If the lower right button (A) is pressed while the
chronograph is stopped, the function hand shows
chronograph 1/20 second as long as it is pressed.
Release the button to return to chronograph
minute indication.
3 Press the upper right button (B) to reset the
chronograph second and chronograph minute
hands to the 0 position.
Chronograph 1/20
second indication
Function hand (chronograph
minute/chronograph 1/20 second)
Chronograph
second hand
If the upper right button (B) is held down after the
measurement stops
Reset Measurement Stop 1/20 second
indication
Button (B) Button (B)
Button (B) While the lower right
button (A) is pressed after
the measurement stops
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen Miyota E690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen Miyota E690 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info