556076
25
Zoom out
Zoom in
Previous page
1/136
Next page
20
4.7 Error Indication
Paper end
Paper empty is detected in two steps: paper near-end and paper end. It causes the ERROR lamp to light. If
paper end is detected, refill the paper. If the paper cover is open, a paper-end is detected.
Paper cover open
During printing, do not open the paper cover. If you open the paper cover accidentally, the ERROR lamp
blinks. Confirm the paper and close the over. Printing resumes automatically.
Thermal head overheat
When you print dense characters or dark image, the head temperature rises. If the head temperature exceeds
a specified level, the printer stops printing operation and waits till the head temperature is lowered. During
waiting, the ERROR lamp blinks. When the head temperature is lowered, printing resumes automatically.
Cutter lock
If the cutter blade stops operating due to paper jam or the like, the ERROR lamp blinks. Remove the cause of
the trouble and press the FEED switch. If the blade does not move and the cover does not open yet even in
the above procedure, follow the procedure in section 4.4 to open the paper cover.
Black Mark detection error (in Black Mark mode)
When no Black Mark can be detected even if a certain amount of paper feed is carried out for Black mark
detection, a Black Mark detection error occurs. If black detection continues more than the specified period,
a No Paper condition is assumed and the same error as No Paper is indicated.
Lighting and blinking status of each error including the above is shown below.
Status POWER Lamp ERROR Lamp Buzzer
Paper-end Lights Lights O
Paper near-end Lights Lights
Cover open error Lights Light O
Cover open error *1 Lightss O
Cutter lock error Lights O
Head overheat error Lights
Memory check error Lights
Low voltage error Lights
High voltage error Lights
Sum check error
Macro execution Lights
wait *2
Black Mark detection Lights O
error
*1: When the printer is printing.
*2: The ERROR lamp may blink even in the execution of macro function.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CT-S300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CT-S300 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info