556076
11
Zoom out
Zoom in
Previous page
1/136
Next page
6
Place the printer on a flat, stable surface without vibration.
Otherwise dropping may cause injury.
Do not use the printer under the following conditions.
A state where the printer ventilation holes are blocked by a nearby wall or
something
A state where any object is placed on the printer
A state where the printer is covered or wrapped by a cloth or bed clothing
Be careful about internal heat buildup, which could cause fire and deform the
case.
Avoid using the printer near a radio or TV set or from supplying it from the same
outlet as these appliances.
Avoid using the printer interconnected with a cable or cord that has no protection
against noise. (For interconnections, use shielded or a twisted pair of cables and
ferrite cores, or other anti-noise devices.)
Avoid using the printer with a device that is a strong source of noise.
The printer may have an adverse effect on nearby radio or TV transmissions.
There may also be cases when nearby electrical appliances adversely influence
the printer, causing data errors or malfunction.
CAUTION
Use the printer with its grounding post connected to a convenient grounding facility.
If leakage occurs electric shock may result.
Do not connect the printers grounding post onto any of the following facilities.
Utility gas piping
A gas explosion could result
Telephone line ground
Lightning rod
If lightning strikes a large surge of current may cause fire or shock.
Utility water pipes
Plastic water pipes should not be used for grounding. (Those approved by a
Waterworks Department may be used.)
Before connecting or disconnecting the grounding lead to or from the printer, always
unplug it from supply outlet.
Caution label is attached on the position shown in the following figure.
Carefully read the precautions in handling before using the printer.
THIS LABEL INDICATES THE RISK OF
ANY INJURY DUE TO HIGH
TEMPERATURE OF THE PRINT HEAD.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CT-S300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CT-S300 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info