556067
80
Zoom out
Zoom in
Previous page
1/83
Next page
6-17
6.5.4 Tear-off and type of data
When the tear-off is valid, the printer monitors the print data for 0.5 second
during or after printing. If print data is transmitted within 0.5 second during or
after printing, the printer will start next printing without tear-off. (When data is
received during printing, the time of monitoring 0.5 second is not inserted.)
The commands for this printer are mainly classified into the immediately
execution commands starting with "SOH" and the sequentially execution
commands starting with "STX." In the tear-off function, only the
sequentially execution commands related to print processing contents are
monitored but the immediately execution commands are not monitored.
Therefore, even if the printer status or the remaining number of print sheets
is read out by using the immediately execution commands during printing,
the tear-off will be performed after printing. On the other hand, if the
sequentially execution commands are used during printing or within 0.5
second after printing to transmit print-related data, the printer will start next
printing without tear-off. (For details, see the Command Reference
manual.)
6.5.5 Cut position adjustments
The cut position can be set with the "fnnn" of the system-level
commands. When the tear-off function is turned on, the following
initialization value is set in the printer.
Initialization value: fnnn = f735 (73.5 mm)
The values higher or lower will increase or decrease the amount of feed
in the tear-off.
Onnnn: Paper position setting
fnnn: Feed position setting
fnnn <= Onnnn
Feed or back-feed is not
performed
fnnn > Onnnn
Feed or back-feed is
performed
Onnnn
Tear ba
r
Paper position sensor
Print head
Tear off
fnnn
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CLP6401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CLP6401 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info