556065
72
Zoom out
Zoom in
Previous page
1/80
Next page
6-13
6.3 Outline of Command System
For details about command system, see the Command Reference separately
available.
Commands for this printer consist of a string of ASCII code and end with "CR"
(decimal: 13, hex: 0D). Generally, commands are classified into two types,
system-level commands and label format commands.
System-level commands are used for system-level operations such as printer
status output, sensor selection and memory card maintenance. On the
other hand, label format commands are used for definition of printing contents
such as character data, bar code data, print speed, and print density.
System-level commands start with ASCII "SOH" ($01) or "STX" ($02).
Commands which start with "SOH" are required for realtime execution.
When received, they are executed immediately even during printing.
Commands which start with "STX" enter the buffer area once and then are
executed in the order of data reception.
Label format commands end with "CR", following the system-level
commands' "STX" + "L."
Commands that start with "SOH":
Executed immediately after receiving data
(e.g. stop of printing, output of printer status, etc.)
System-level commands
start with ASCII "SOH" ($01) or
"STX" ($02).
Commands that start with "STX":
Executed in the order of data input to the receive
buffer
(e.g. switching of sensor, memory card
maintenance, etc.)
"STX" + "L" ¯ "E" (with print)
"X" (without print)
Print parameter control
Character data definition commands
Bar code definition commands
Graphic commands
Label format commands
end with "CR"
Other commands
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CLP6002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CLP6002 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info