556065
34
Zoom out
Zoom in
Previous page
1/80
Next page
3-7
3.4 Paper Setting
CAUTION Be careful of the edges of the plates so injury or
property damage is possible.
The printer is designed for easy loading of paper and ribbon. After opening the
cover, set the register paper as follows:
1 Push down the open lever to move the print head out of the way.
2 Push down the lever to move the sensor arm out of the way.
3 Attach the roll paper and roll guide to the roll holder and position it in the
paper holder . After installing the roll paper, adjust the roll guide to the
width of the roll paper. The roll paper should be in its deepest position
(reference side).
4 Pull the moving paper guide toward you to maintain the paper insertion
path.
5 Set the roll paper as shown in the figure.
6 Attach the left side of roll paper to the fixed paper guide and let the moving
paper guide slightly contact the other end of the roll so that the paper does
not skew.
7 Push down the sensor arm until the lever hook is locked.
8 Align the paper with the positioning notch of the peeling-off plate and then
press down the ribbon bearing flat to close the print head. The open lever
hook will lock.
9 Close the cover.
10 Turn on the power to the printer. The LCD screen on the control panel will
display "On line." Press the Feed key. The paper will advance to the next
label and stop there.
(For encircled numbers, see figures on the next page.)
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CLP6002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CLP6002 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info