556062
2
Zoom out
Zoom in
Previous page
1/2
Next page
What does the “Z” mean?
Label printers talk a variety of different languages! Our printers
usually use their own Citizen language but we have created a
version that specifically understand the ZPL
®
language from
Zebra
®
.
So your CLP 521Z or CLP 621Z printer understands this ZPL
®
language instead of the normal Citizen language.
How does this affect me?
In normal operation, you will notice no difference in operation of
your printer. It will still print labels in the same way and media
and ribbons are loaded in exactly the same way to a normal printer.
Please refer to the other quick-start guides for details of media
loading and operation of the printer.
However, the configuration and setup of some of the printer’s
internal settings will be a little different. This may not affect you
either if your printer can be used in an ‘out of the box’
configuration.
What does this guide say?
This guide explains the differences in the printer’s configuration
system and also explains the best printer driver to use with
different applications including the Windows
®
operating systems
Windows
®
is a registered trademark of Microsoft Corporation in the United States
and/or other countries. ZPL
®
and Zebra
®
are registered trademarks of Zebra
Technologies (ZIH Corp) in the United States and/or other countries.
1
Introduction
How to Use VuePrint
TM
The VuePrint menu system is used to make changes to the settings of
the printer. Please refer to the Quick Start Guide for more details on
its operation. You can access the VuePrint system by switching on
the printer holding down the [MODE] key.
Machine Information
This section of the print out will give you details specific to your
printer, such as the version of firmware, total distance printed by your
printer and the media sensor or optional interfaces.
Current Menu Settings
The “Page Setup”, “After Print” and “Interface” menus are exactly the
same on these printers. However, the System Setup menu has some
different parameters.
- The Metric/Inch option is only used to change the display in the
VuePrint menu output and has no effect on printer operation and
layout
- The Control Prefix, Format Prefix and Delimiter Prefix are all
changeable in these printers. This changes the ‘command codes’
that the printer recognizes as actions for the printer. You will
only need to change this for specific customer applications.
- The “Media Power Up” option (either On or Off) determines
whether or not the printer feeds the paper to the top-of-form
(start of a new label) when the printer is turned on. This is “on”
by default but you may choose to switch this off for certain
applications.
- The “Control Code” and “Emulation Select” menu options are
not present or needed on the CLP 521Z or 621Z printers.
2
Using VuePrint
TM
Configuration System
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CLP521Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CLP521Z in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info