556039
62
Zoom out
Zoom in
Previous page
1/69
Next page
62
Appendixes
Interfaces
This printer is connected to a computer and prints according to
commands sent from the computer.
There are three types of computer interfaces, and these are connected to
devices suited to each type of interface. The printer can also be connected
to a computer by the optional Ethernet.
Serial Interface
Specications
System Start/stop asynchronous duplex communication
Signal level RS-232C
Baud rate 2400, 4800, 9600, 19200, 38400,57600, 115200 bps
Bit length 7 Bit, 8 Bit
Stop bit 1 Bit, 2 Bit
Parity Odd, even, none
Connector D-SUB 25 PIN
Signal line and pin arrangement
Pin No. Signal code Signal name Function
1 FG Protective grounding Protective grounding
2 TXD Transmitted data
Signal line that transmits data
from the printer to other devices
3 RXD Received data
Signal line that transmits data
from other devices to the printer
4 RTS Transmission request
Signal line that becomes active
when the printer can receive
data
5 CTS Able to transfer data
Signal line that becomes active
when other devices can receive
data from the printer
6 DSR Data set relay
Signal line that is active when
an external device can interface
with the printer
7 SGND Signal line ground
Shows the ground level of the
signal line
8-13 NC - Not used
14 VCC +3.3V (FACTORY USE ONLY)
15-19 NC - Not used
20 DTR Data terminal relay
Signal line that is active when
an external device can interface
with the printer
21-25 NC - Not used
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CL-S6621 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CL-S6621 in the language / languages: English as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info