556036
46
Zoom out
Zoom in
Previous page
1/57
Next page
4
Tr oubleshooting
46
Indication
The printer is not
printing neatly.
The printing position
changes.
Check
3) Is the thermal printhead
dirty?
Is a label stuck to the head.
4) Is the thermal printhead in
the correct position for the
media that is used?
5) Is the printer’s head
pressure balance correct for
the width of the media that
is used?
1) Is the media properly
installed?
2) Is the platen dirty?
Is it deformed?
3) Are the data contents and
the command signals from
the host appropriate?
4) Are the menu values set
appropriately?
5) Are the sensitivities of the
media sensors appropriate
for the media that is used?
Corrective action
3) If it is dirty, remove the dirt with the
attached head cleaner.
If a label is stuck to the head, remove
it.
Note: Do not use a metal object to
remove a label stuck to the inside of
the printer. (This may damage the
print head.) If adhesive label material
is stuck to the thermal printhead,
remove it with a soft cloth soaked in
ethyl alcohol.
4) Adjust the offset of the thermal
printhead with the media thickness
adjustment dial.
5) Adjust the thermal printhead pressure
with the media width adjustment
dial.
1) Correctly install the media.
2) If it is dirty, clean it with ethyl alcohol.
If it is deformed, replace it.
Note: Consult with the dealer that
supplied the printer concerning the
replacement.
3) If an error message is displayed, check
the content of the software and the
communication status set by the host
computer.
4) Set the correct menu values using the
operating panel or the host computer.
5) Set the media sensitivity to
appropriate values.
If this does not solve the problem,
change the “Sensor level” that is set
in the “System setup.”
Cleaning (p.44)
Media Thickness
Adjustment (p.42)
Media Width
Adjustment (p.43)
Media Setting (p.22)
Cleaning (p.44)
LED Functions (p.20)
Menu Setting Table
(p.32)
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CL-S521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CL-S521 in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info