556032
28
Zoom out
Zoom in
Previous page
1/31
Next page
5-3. Troubleshooting
Problem Solution
The printer is switched on but the LEDs do not
light up.
Check the power supply.
The LED lights up red (ERROR) and printing
is interrupted.
Check whether is an error in the software settings or
the print commands.
Replace the print medium with a suitable medium.
Check whether there is a label jam.
Check whether the label stock is finished.
Check whether the print mechanism is closed (the print
head is not positioned correctly).
Check whether the print medium is covering the
sensor.
The label stock passes through the printer but
no image is printed.
Please make sure that the label stock is loaded the
right way up and that it is suitable material.
Choose the correct printer driver.
Choose the correct label stock and a suitable printing
mode.
The label stock jams during printing. Clear the paper jam. Remove any label material left on
the thermal print head and clean the print head using a
soft lint-free cloth dipped in alcohol.
The label stock does not move correctly and
there is no printed image on some parts of the
label.
Check whether any label material is stuck to the
thermal print head.
Check for errors in the application software.
Check whether the starting position has been set
incorrectly.
Check the power supply.
There is no printed image on part of the label. Check the thermal print head for dust or other dirt.
Use the internal “CZ SELFTEST” command to check
whether the thermal print head will carry out a
complete print job.
Check the quality of the print medium.
The printed image is positioned incorrectly. Check whether there is paper or dust covering the
sensor.
Check whether the label liner is suitable. Please
contact your dealer.
Check the paper guide settings.
A label is missed out during printing. Check the label height setting.
Check whether there is dust covering the sensor.
26
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Citizen CL-S300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Citizen CL-S300 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info