8. Setting the Time and Date
If the crown of your watch is of the screw-lock type, operate the crown after first
loosening the screw locking mechanism by turning the crown to the left. When finished
operating the crown, turn the crown to the right while pushing in after having returned it
to the normal position and tighten securely.
[Setting the Time]
1. Pull the crown out to the time correction
position when the second hand reaches the
0 seconds position.
2. Turn the crown to set the time.
• The 24 hour hand moves in coordination
with the hour hand. Pay attention to AM
and PM when setting the time.
3. Securely push in the crown to the normal
position in synchronization with a
telephone or other time service.
16 17
<Helpful Hint for Setting the Time Accurately>
After first stopping the second hand at the 0 seconds position, advance the minute hand
4-5 minutes past the correct time and then turn it back to the correct time. Then push in
the crown in synchronization with a telephone or other time service to accurately set the
time.
Second hand 24 hour hand
Time
correction
position
Normal
position
Minute handHour hand
