141
<Correcting the time>
1. Pull out the crown to position 2.
L The second hand moves to the 12:00 position, and then stops after moving left and right.
2. Turn the crown to set the minute hand.
A Turn the crown to the right by 1 click to move the minute hand ahead by 1 minute.
B Turn the crown to the left by 1 click to move the minute hand back by 1 minute.
3. Press the lower right button (A). The hour hand moves left and right.
(Hour correction status)
Turn the crown to set the hour hand.
A Turn the crown to the right by 1 click to move the hour hand ahead by 1 hour.
B Turn the crown to the left by 1 click to move the hour hand back by 1 hour.
L Continuously turn the crown by 2 or more clicks to make the hands move continuously.
L Turn the crown to the left or right to stop the continuous movement of the hands.
[NOTE] When the date changes, it is 0:00 a.m. (midnight). Take care to observe whether it is
a.m. or p.m.
3. Set the time by using a time signal, and then press the crown back into its normal position.
L After pulling out the crown to position 2, press the lower right button (A) to select
correction mode (minute or hour). The changing correction mode will be indicated by
the hand moving.
140
i
Corrections can be made by turning the crown in each of these conditions. When setting the calendar,
pressing the lower right button (A) will switch between month correction and leap year correction.
9. Setting the Time
When this watch has received the radio wave, it automatically adjusts the date and time.
If the watch is used overseas or in a location where the radio wave cannot reach, the date
and time can be set manually. When returning to a region where the radio wave can be
received, perform the automatic reception or on demand reception.
Setting the Time and Date Manually
[Normal hand movement]
[Date correction]
[Time correction]
Button (A)
j The month, year (elapsed years
after the most recent leap year),
and date can be corrected.
j Each hand can be corrected.
