127
Hand Movement
The second hand stops at RX and then moves to the H, M or L to indicate the reception level. When
the reception level is not indicated, this means that radio waves were unable to be received, and the
second hand resumes normal hand movement.
The second hand indicates H, M, L or NO and stops.
The second hand stops at the 12:00 position. (It stops at the position corresponding to the time
difference if a time difference has been set.) The second hand 12:00 position indicates a time
difference of ±0 hours. One step of the second hand indicates a time difference of one hour.
Turning the crown to the right causes the second hand to make one revolution in the clockwise direction
and the minute hand to advance by one minute. Turning the crown to the left causes the second hand to
make one revolution in the counter-clockwise direction and the minute hand to go back by one minute.
Continuously turn the crown quickly to advance the hands rapidly.
* The date changes at 12:00 AM.
126
The second hand moves to the no. of elapsed years from the most recent leap year stored in the
memory of the watch and stops.
Date: Turning the crown to the right causes the date to advance by one day, while turning the crown to
the left causes it to move back by one day.
Day: The day changes when the lower right button (A) is pressed once and the crown is turned to the
right, and changes back when the crown is turned to the left.
Leap year: The second hand advances by one step when the lower right button (A) is pressed once and
the crown is turned to the right, and goes back when the crown is turned to the left.
Function
On Demand
Reception
Confirmation
of reception
result
Time
difference
correction
· Setting the
time
· Setting the
date
(see p.134)
(see p.137)
(see p.143)
(see p.138)
(see p.140)
Button or Crown Operation
Press the lower right button (A) for 2
seconds or more and then release when
the second hand has stopped at RX.
Press the lower right button (A)
once.
Press the upper right button (B)
once and turn the crown. After
setting, press the upper right
button (B) once again.
Pull the crown out to Position 2.
Pull the crown out to Position 1.
* The corrected parameter
changes in the order of the
day, number of years elapsed
from most recent leap year and
date each time the lower right
button (A) is pressed once.
[List of Functions
of Each
Component]
Crown
Button (B)
Button (A)
(No. of years elapsed from
most recent leap year)
